The Massey Ferguson 194F tractor primary air filter part number is 3757472M91. The inner safety filter is 3703704M91.
Massey Ferguson 194F Air Filter Details
Primary air filter part number
3757472M91
Inner safety air filter part number
3703704M91
Air filter dimensions
Outside diameter: 3.7 in | Inside diameter: 2.4 in | Height: 10 in
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
Listed Filter Size Check
Height
10 in
Outside diameter
3.7 in
Inside diameter
2.4 in
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 194F Extra Air Filter Notes
Engine model
Perkins A4.248
Engine horsepower
49-60 hp
Primary filter note
For the Massey Ferguson 194F, the listed primary air filter part number is 3757472M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Safety filter note
The listed inner safety air filter is 3703704M91. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Listed dimensions: Outside diameter: 3.7 in | Inside diameter: 2.4 in | Height: 10 in. Use dimensions as a second check, not as the only buying method.
Filter size note
The listed dimensions point to a mid-size element length at 10 in and small outside diameter at 3.7 in. Use that as a fitment sanity check against the old filter.
Power range note
The important combo is power plus element size. That tells you whether restriction is a real working problem or mainly a fit/seal problem.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 194F Air Filter FAQs
How do I avoid mixing up the Massey Ferguson 194F air-filter elements?
For a normal service, plan on the primary element first and inspect the safety element separately. Replacing both every single time is usually wasted money unless the housing was contaminated.
What is the safest way to match a Massey Ferguson 194F air filter?
Use 3757472M91 as the anchor number, then verify the old element and housing label. This is a Massey-style M-suffix number, and the setup looks like a primary element plus an inner safety element, so one loose search result is not enough. The size data points to a long, narrow element, so compare the removed element against both length and outside diameter before fitting.
Why compare Massey Ferguson 194F horsepower with filter dimensions?
Comparing power and element size helps catch bad cross-references. A tiny replacement for a harder-working engine should make you suspicious before installing it.
Which Massey Ferguson 194F air-filter measurement matters most?
This looks like a long, narrow element. Use the dimensions to reject obvious bad cross-references, especially if the inner diameter or seal lip does not match the removed element.
What is the biggest fitment trap with the Massey Ferguson 194F air filter?
The trap is assuming a long, narrow element is close enough because it looks right online. The seal face, end-cap depth and cover pressure have to match, otherwise dust can bypass the media.
What part-number mistake should I avoid on a Massey Ferguson 194F?
If a listing shows a shortened version of 3757472M91, be suspicious. Air filters are fitment parts, not close-enough parts.
Why not stretch a dirty Massey Ferguson 194F air filter under load?
The important combo is power plus element size. That tells you whether restriction is a real working problem or mainly a fit/seal problem.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
