The Massey Ferguson 4292 tractor cooling system capacity is 52.8 gal | 199.8 L, coolant type is ethylene glycol-based coolant, and coolant change interval is every 500 hours.
Massey Ferguson 4292 Coolant Capacity Details
Cooling system capacity
52.8 gal | 199.8 L
Coolant type
Ethylene glycol-based coolant
Coolant change interval
Every 500 hours
Coolant mixture ratio
The recommended coolant mixture for a Massey Ferguson tractor typically consists of 50% antifreeze and 50% water
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
52.8 gal
Average
10 gal
Low
6 gal
High
16 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the row-crop tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 4292 Extra Coolant Notes
Engine horsepower
110 hp | 82 kW
Engine displacement
4.4 L | 268 cu in
Capacity note
For the Massey Ferguson 4292, the listed cooling system capacity is 52.8 gal | 199.8 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
The recommended coolant mixture for a Massey Ferguson tractor typically consists of 50% antifreeze and 50% water.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 4292 Coolant FAQs
How much coolant does a Massey Ferguson 4292 take?
The Massey Ferguson 4292 takes 52.8 gal | 199.8 L of coolant. That is well above the normal row-crop tractor benchmark shown here, so treat it as a full cooling-system service job, not a quick top-up.
Is 52.8 gal | 199.8 L a lot of coolant for a Massey Ferguson 4292?
Yes. For this tractor category, 52.8 gal | 199.8 L is well above normal. This is the sort of refill where you want all coolant on hand before draining, because stopping halfway through the job is annoying and messy.
How many coolant jugs do I need for a Massey Ferguson 4292?
Do not underestimate this refill. A 52.8 gal | 199.8 L system needs about 53 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 26.4 gal of concentrate and 26.4 gal of distilled water. In metric terms, that is roughly 40 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 4292?
The listed coolant is ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent. The listed mix is the recommended coolant mixture for a Massey Ferguson tractor typically consists of 50% antifreeze and 50% water, so do not run straight water except as a short emergency move.
How much concentrate and water does a Massey Ferguson 4292 need?
With the listed the recommended coolant mixture for a Massey Ferguson tractor typically consists of 50% antifreeze and 50% water mix, a full 52.8 gal | 199.8 L refill works out to about 26.4 gal of antifreeze concentrate and 26.4 gal of distilled water. If using premix, do not add extra water unless the product label says to.
When should the Massey Ferguson 4292 coolant be changed?
The listed interval is every 500 hours. Hour-based service matters most on working tractors that spend long periods hot under load.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
