The New Holland TL5050 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.9 gpm | 45.0 lpm, and valves/remotes are listed as 1 to 3.
Hydraulic Flow11.9 gpm | 45.0 lpm
Valves / Remotes1 to 3
Lift Capacity4,497 lbs | 2039 kg
New Holland TL5050 Hydraulic Capacity & Flow Specs
Pump flow
11.9 gpm | 45.0 lpm
Hydraulic valves
1 to 3
New Holland TL5050 Hitch, Remote & Lift Specs
Rear hitch type
II
Rear lift at ends
7,368 lbs | 3342 kg
Rear lift at 24 inches
4,497 lbs | 2039 kg
New Holland TL5050 Useful Hydraulic Calculations
Rear lift per pump gpm
377.9 lb per gpm
New Holland TL5050 Hydraulic Comparison Charts
Pump flow comparison
This model
11.9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
4,497 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TL5050 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Hydraulic wet disc brakes
New Holland TL5050 Hydraulic Capacity FAQ
Why is the New Holland TL5050 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TL5050, but pump flow is 11.9 gpm | 45.0 lpm and lift is listed as 4,497 lbs | 2039 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TL5050 hydraulics feel fast or slow?
The useful speed clue is 11.9 gpm | 45.0 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TL5050?
On the New Holland TL5050, 11.9 gpm | 45.0 lpm pump flow points to slower loader and cylinder movement and 4,497 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TL5050?
For implement matching, the useful checks are 11.9 gpm flow, 4,497 lb listed lift, 1 to 3 remote/valve listing, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TL5050 rear lift capacity strong?
The listed lift figure is 4,497 lbs | 2039 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TL5050 hydraulic remotes enough?
The New Holland TL5050 remote/valve listing is 1 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TL5050 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.9 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TL5050 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 4,497 lbs | 2039 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the New Holland TL5050 hydraulics?
For service planning, flow is listed at 11.9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
