The New Holland TC48DA tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm, hydraulic type is open center, and valves/remotes are listed as 3 Optional.
Hydraulic Flow12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm
Hydraulic Typeopen center
Valves / Remotes3 Optional
Lift Capacity3465 lbs | 1571 kg
New Holland TC48DA Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Total hydraulic flow
12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm
Steering flow
5.52 gpm | 20.9 lpm
Hydraulic valves
3 Optional
New Holland TC48DA Hitch, Remote & Lift Specs
Rear hitch type
II/I
Rear lift at 24 inches
3465 lbs | 1571 kg
New Holland TC48DA Hydraulic Comparison Charts
Pump flow comparison
This model
12 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
3,465 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TC48DA Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
mechanical wet disc brakes
New Holland TC48DA Extra Hydraulic Notes
Total Flow
12 gpm
New Holland TC48DA Hydraulic Capacity FAQ
Why is the New Holland TC48DA hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TC48DA, but total hydraulic flow is 12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm, system type is open center, and lift is listed as 3465 lbs | 1571 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TC48DA hydraulics feel fast or slow?
The useful speed clue is 12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm total hydraulic flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TC48DA?
On the New Holland TC48DA, 12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm total hydraulic flow points to slower loader and cylinder movement and 3,465 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TC48DA?
For implement matching, the useful checks are 12 gpm flow, 3,465 lb listed lift, 3 Optional remote/valve listing, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TC48DA rear lift capacity strong?
The listed lift figure is 3465 lbs | 1571 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TC48DA hydraulic remotes enough?
The New Holland TC48DA remote/valve listing is 3 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TC48DA hydraulics handle long hydraulic jobs?
The useful heat clues are 12 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TC48DA hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I and listed lift is 3465 lbs | 1571 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland TC48DA use?
The hydraulic system is listed as open center with 12 gpm * Advertised. Flow during testing was 11.3 GPM. 45.4 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TC48DA hydraulics?
For service planning, the system is listed as open center and flow is listed at 12 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
