The New Holland TC29 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pressure is 2133 psi | 147.1 bar, and hydraulic type is open center.
Pressure2133 psi | 147.1 bar
Hydraulic Typeopen center
Lift Capacity1635 lbs | 741 kg
New Holland TC29 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2133 psi | 147.1 bar
New Holland TC29 Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at 24 inches
1635 lbs | 741 kg
New Holland TC29 Hydraulic Comparison Charts
Hydraulic pressure comparison
This model
2,133 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
1,635 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TC29 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Differential lock
mechanical rear
New Holland TC29 Hydraulic Capacity FAQ
Why is the New Holland TC29 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TC29, but pressure is 2133 psi | 147.1 bar, system type is open center, and lift is listed as 1635 lbs | 741 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
What does the New Holland TC29 hydraulic pressure tell you?
The pressure spec is 2133 psi | 147.1 bar, close to the 2,300 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TC29?
On the New Holland TC29, pump/remote flow is not listed here, so loader speed cannot be judged from this page alone, 2,133 psi pressure affects force more than speed, and 1,635 lb listed lift is the number to watch for implement weight. You need the pump-flow or remote-flow spec to judge speed; pressure and lift only tell you force/capacity.
How do you judge hydraulic implement fit on the New Holland TC29?
For implement matching, the useful checks are 2,133 psi pressure, 1,635 lb listed lift, and I hitch. That combination is normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TC29 rear lift capacity strong?
The listed lift figure is 1635 lbs | 741 kg, close to the 1,800 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
What do the New Holland TC29 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 1635 lbs | 741 kg. Hitch category gets the implement connected and lift capacity gets it raised; pump flow still needs checking separately if cylinder speed matters.
What hydraulic system does the New Holland TC29 use?
The hydraulic system is listed as open center and 2133 psi | 147.1 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TC29 hydraulics?
For service planning, the system is listed as open center and pressure is listed at 2,133 psi. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
