The New Holland Boomer 1025 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 3.75 gpm | 14.2 lpm, hydraulic pressure is 1849 psi | 127.5 bar, and hydraulic type is open center.
Hydraulic Flow3.75 gpm | 14.2 lpm
Pressure1849 psi | 127.5 bar
Hydraulic Typeopen center
Lift Capacity700 lbs | 317 kg
New Holland Boomer 1025 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
1849 psi | 127.5 bar
Pump flow
3.75 gpm | 14.2 lpm
Total hydraulic flow
5.6 gpm | 21.2 lpm
Steering flow
1.85 gpm | 7.0 lpm
New Holland Boomer 1025 Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at ends
1580 lbs | 716 kg
Rear lift at 24 inches
700 lbs | 317 kg
New Holland Boomer 1025 Useful Hydraulic Calculations
Total flow vs pump flow
149.3% of listed pump flow
Steering flow vs pump flow
49.3% of listed pump flow
Rear lift per pump gpm
186.7 lb per gpm
Estimated hydraulic horsepower
about 4 hydraulic hp from listed pressure and pump flow
New Holland Boomer 1025 Hydraulic Comparison Charts
Pump flow comparison
This model
3.8 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Hydraulic pressure comparison
This model
1,849 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
700 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Boomer 1025 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Mechanical wet disc brakes
New Holland Boomer 1025 Hydraulic Capacity FAQ
Why is the New Holland Boomer 1025 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Boomer 1025, but pump flow is 3.75 gpm | 14.2 lpm, pressure is 1849 psi | 127.5 bar, system type is open center, and lift is listed as 700 lbs | 317 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Boomer 1025 hydraulics feel fast or slow?
The useful speed clue is 3.75 gpm | 14.2 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland Boomer 1025 hydraulic pressure tell you?
The pressure spec is 1849 psi | 127.5 bar, below the 2,300 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland Boomer 1025?
On the New Holland Boomer 1025, 3.75 gpm | 14.2 lpm pump flow points to slower loader and cylinder movement, 1,849 psi pressure affects force more than speed, and 700 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Boomer 1025?
For implement matching, the useful checks are 3.8 gpm flow, 1,849 psi pressure, 700 lb listed lift, and I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Boomer 1025 rear lift capacity strong?
The listed lift figure is 700 lbs | 317 kg, below the 1,800 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the New Holland Boomer 1025 hydraulics handle long hydraulic jobs?
The useful heat clues are 3.8 gpm flow, 1,849 psi pressure, and about 4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland Boomer 1025 make on paper?
Using 1,849 psi and 3.8 gpm, the rough pressure-flow estimate is about 4 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland Boomer 1025 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 700 lbs | 317 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Boomer 1025 use?
The hydraulic system is listed as open center with 3.75 gpm | 14.2 lpm pump flow and 1849 psi | 127.5 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
