The New Holland Boomer 55 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 8.2 gpm | 31.0 lpm, hydraulic type is open center, and valves/remotes are listed as 1 or 2.
Hydraulic Flow8.2 gpm | 31.0 lpm
Hydraulic Typeopen center
Valves / Remotes1 or 2
Lift Capacity2116 lbs | 959 kg
New Holland Boomer 55 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
8.2 gpm | 31.0 lpm
Hydraulic valves
1 or 2
New Holland Boomer 55 Hitch, Remote & Lift Specs
Rear hitch type
I
Rear hitch control
position control
Rear lift at ends
2756 lbs | 1250 kg
Rear lift at 24 inches
2116 lbs | 959 kg
New Holland Boomer 55 Useful Hydraulic Calculations
Rear lift per pump gpm
258 lb per gpm
New Holland Boomer 55 Hydraulic Comparison Charts
Pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
2,116 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Boomer 55 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Differential lock
mechanical rear
New Holland Boomer 55 Hydraulic Capacity FAQ
Why is the New Holland Boomer 55 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Boomer 55, but pump flow is 8.2 gpm | 31.0 lpm, system type is open center, and lift is listed as 2116 lbs | 959 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Boomer 55 hydraulics feel fast or slow?
The useful speed clue is 8.2 gpm | 31.0 lpm pump flow, close to the 8 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the New Holland Boomer 55?
On the New Holland Boomer 55, 8.2 gpm | 31.0 lpm pump flow is around normal for loader/cylinder speed and 2,116 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Boomer 55?
For implement matching, the useful checks are 8.2 gpm flow, 2,116 lb listed lift, 1 or 2 remote/valve listing, and I hitch. That combination is in the normal flow range for this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Boomer 55 rear lift capacity strong?
The listed lift figure is 2116 lbs | 959 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland Boomer 55 hydraulic remotes enough?
The New Holland Boomer 55 remote/valve listing is 1 or 2. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland Boomer 55 hydraulics handle long hydraulic jobs?
The useful heat clues are 8.2 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland Boomer 55 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position control, and listed lift is 2116 lbs | 959 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Boomer 55 use?
The hydraulic system is listed as open center with 8.2 gpm | 31.0 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland Boomer 55 hydraulics?
For service planning, the system is listed as open center and flow is listed at 8.2 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
