The New Holland 9280 tractor hydraulic capacity is 15.3 gal | 57.9 L, pump flow is 25 gpm | 94.6 lpm, and hydraulic pressure is 2500 psi | 172.4 bar.
Hydraulic Capacity15.3 gal | 57.9 L
Hydraulic Flow25 gpm | 94.6 lpm
Pressure2500 psi | 172.4 bar
Hydraulic Typeclosed center load-sensing
Lift Capacity12753 lbs | 5784 kg
New Holland 9280 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load-sensing
Hydraulic capacity
15.3 gal | 57.9 L
Hydraulic pressure
2500 psi | 172.4 bar
Pump flow
25 gpm | 94.6 lpm
Steering flow
27 gpm | 102.2 lpm
New Holland 9280 Hitch, Remote & Lift Specs
Rear hitch type
IVN
Rear hitch control
electronic position control
Rear lift at 24 inches
12753 lbs | 5784 kg
New Holland 9280 Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.6 gpm per gal
Hydraulic tank turnover estimate
about 0.6 minutes at rated pump flow
Steering flow vs pump flow
108% of listed pump flow
Rear lift per pump gpm
510.1 lb per gpm
Rear lift per hydraulic gallon
833.5 lb per gal
Estimated hydraulic horsepower
about 36.5 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
57.9 L capacity with 25 gpm pump flow
New Holland 9280 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
15.3 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
25 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,500 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
12,753 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 9280 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Articulated power steering
Brakes
Hydraulic disc brakes
New Holland 9280 Hydraulic Capacity FAQ
Is the New Holland 9280 hydraulic capacity big or small for its size?
The New Holland 9280 lists 15.3 gal | 57.9 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland 9280 hydraulics feel fast or slow?
The useful speed clue is 25 gpm | 94.6 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland 9280 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland 9280?
On the New Holland 9280, 25 gpm | 94.6 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 12,753 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 9280?
For implement matching, the useful checks are 25 gpm flow, 2,500 psi pressure, 12,753 lb listed lift, and IVN hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 9280 rear lift capacity strong?
The listed lift figure is 12753 lbs | 5784 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the New Holland 9280 hydraulics handle long hydraulic jobs?
The useful heat clues are 15.3 gal of hydraulic capacity, 25 gpm flow, 2,500 psi pressure, and about 36.5 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the New Holland 9280 make on paper?
Using 2,500 psi and 25 gpm, the rough pressure-flow estimate is about 36.5 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland 9280 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN, hitch control is electronic position control, and listed lift is 12753 lbs | 5784 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland 9280 use?
The hydraulic system is listed as closed center load-sensing with 25 gpm | 94.6 lpm pump flow and 2500 psi | 172.4 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
