The Massey Ferguson 7722 tractor hydraulic capacity is 26.4 gal | 99.9 L, pump flow is 29 gpm | 109.8 lpm, and hydraulic pressure is 2900 psi | 200.0 bar.
Massey Ferguson 7722 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Hydraulic capacity | 26.4 gal | 99.9 L |
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 29 gpm | 109.8 lpm |
| SCV flow | 24.3 gpm | 92.0 lpm |
| Hydraulic valves | 3 to 5 |
Massey Ferguson 7722 Hitch, Remote & Lift Specs
| Rear hitch type | III |
|---|---|
| Rear hitch control | electronic lower-link draft sensing |
| Rear lift at ends | 13500 lbs * With Dyna-6 transmission 6123 kg |
| Drawbar category | Cat. 2 |
Massey Ferguson 7722 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.1 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.9 minutes at rated pump flow |
| SCV flow vs pump flow | 83.8% of listed pump flow |
| Rear lift per pump gpm | 465.5 lb per gpm |
| Rear lift per hydraulic gallon | 511.4 lb per gal |
| Estimated hydraulic horsepower | about 49.1 hydraulic hp from listed pressure and pump flow |
| Metric capacity vs pump flow | 99.9 L capacity with 29 gpm pump flow |
Massey Ferguson 7722 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 7722 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
| Differential lock | full-locking electro-hydraulic |
Massey Ferguson 7722 Hydraulic Capacity FAQ
Is the Massey Ferguson 7722 hydraulic capacity big or small for its size?
The Massey Ferguson 7722 lists 26.4 gal | 99.9 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 7722 hydraulics feel fast or slow?
The useful speed clue is 29 gpm | 109.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 7722 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 7722?
On the Massey Ferguson 7722, 29 gpm | 109.8 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 13,500 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 7722?
For implement matching, the useful checks are 29 gpm flow, 2,900 psi pressure, 13,500 lb listed lift, and 3 to 5 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 7722 rear lift capacity strong?
The listed lift figure is 13500 lbs * With Dyna-6 transmission 6123 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 7722 hydraulic remotes enough?
The Massey Ferguson 7722 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 7722 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.4 gal of hydraulic capacity, 29 gpm flow, 2,900 psi pressure, and about 49.1 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 7722 make on paper?
Using 2,900 psi and 29 gpm, the rough pressure-flow estimate is about 49.1 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 7722 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III, hitch control is electronic lower-link draft sensing, and listed lift is 13500 lbs * With Dyna-6 transmission 6123 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
