The Massey Ferguson 7150 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 36.46 gpm | 138.0 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is load sensing.
Massey Ferguson 7150 Hydraulic Capacity & Flow Specs
| Hydraulic type | load sensing |
|---|---|
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 36.46 gpm | 138.0 lpm |
| Hydraulic valves | 4 |
Massey Ferguson 7150 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | position and draft control |
| Rear lift | 10360 lbs | 4699 kg | 12130 lbs (Optional) | 5502 kg |
Massey Ferguson 7150 Useful Hydraulic Calculations
| Rear lift per pump gpm | 284.1 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 61.7 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 9.1 gpm per valve |
Massey Ferguson 7150 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 7150 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Hydraulic wet disc brakes |
Massey Ferguson 7150 Hydraulic Capacity FAQ
Why is the Massey Ferguson 7150 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 7150, but pump flow is 36.46 gpm | 138.0 lpm, pressure is 2900 psi | 200.0 bar, system type is load sensing, and lift is listed as 10360 lbs | 4699 kg | 12130 lbs (Optional) | 5502 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 7150 hydraulics feel fast or slow?
The useful speed clue is 36.46 gpm | 138.0 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Massey Ferguson 7150 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 7150?
On the Massey Ferguson 7150, 36.46 gpm | 138.0 lpm pump flow points to quicker loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 10,360 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 7150?
For implement matching, the useful checks are 36.5 gpm flow, 2,900 psi pressure, 10,360 lb listed lift, and 4 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 7150 rear lift capacity strong?
The listed lift figure is 10360 lbs | 4699 kg | 12130 lbs (Optional) | 5502 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 7150 hydraulic remotes enough?
The Massey Ferguson 7150 lists 4 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the Massey Ferguson 7150 hydraulics handle long hydraulic jobs?
The useful heat clues are 36.5 gpm flow, 2,900 psi pressure, and about 61.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 7150 make on paper?
Using 2,900 psi and 36.5 gpm, the rough pressure-flow estimate is about 61.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 7150 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position and draft control, and listed lift is 10360 lbs | 4699 kg | 12130 lbs (Optional) | 5502 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
