The Massey Ferguson 4880 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16 gpm (transmission) | 60.6 lpm, hydraulic type is open center, and valves/remotes are listed as 3 to 4.
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 4880 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 4880, but pump flow is 16 gpm (transmission) | 60.6 lpm, system type is open center, and lift is listed as 13,000 lbs | 5896 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 4880 hydraulics feel fast or slow?
The useful speed clue is 16 gpm (transmission) | 60.6 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson 4880?
On the Massey Ferguson 4880, 16 gpm (transmission) | 60.6 lpm pump flow points to slower loader and cylinder movement and 13,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 4880?
For implement matching, the useful checks are 16 gpm flow, 13,000 lb listed lift, 3 to 4 remote/valve listing, and IV hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 4880 rear lift capacity strong?
The listed lift figure is 13,000 lbs | 5896 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 4880 hydraulic remotes enough?
The Massey Ferguson 4880 remote/valve listing is 3 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 4880 hydraulics handle long hydraulic jobs?
The useful heat clues are 16 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Massey Ferguson 4880 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IV, hitch control is position control with electronic lower link sensing, and listed lift is 13,000 lbs | 5896 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 4880 use?
The hydraulic system is listed as open center with 16 gpm (transmission) | 60.6 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 4880 hydraulics?
For service planning, the system is listed as open center and flow is listed at 16 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
