The Massey Ferguson 3690 tractor hydraulic capacity is 19.8 gal | 74.9 L, pump flow is 5.5 gpm (low-pressure element) | 20.8 lpm, and hydraulic pressure is 247 psi (low-pressure element) | 17.0 bar.
Massey Ferguson 3690 Hydraulic Capacity & Flow Specs
| Hydraulic capacity | 19.8 gal | 74.9 L |
|---|---|
| Hydraulic pressure | 247 psi (low-pressure element) | 17.0 bar |
| Pump flow | 5.5 gpm (low-pressure element) | 20.8 lpm |
| Hydraulic valves | 2 or 3 |
Massey Ferguson 3690 Hitch, Remote & Lift Specs
| Rear hitch type | III |
|---|---|
| Rear hitch control | position and electronic draft control |
| Rear lift at 24 inches | 10000 lbs | 4536 kg |
Massey Ferguson 3690 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 0.3 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 3.6 minutes at rated pump flow |
| Rear lift per pump gpm | 1,818.2 lb per gpm |
| Rear lift per hydraulic gallon | 505.1 lb per gal |
| Estimated hydraulic horsepower | about 0.8 hydraulic hp from listed pressure and pump flow |
| Metric capacity vs pump flow | 74.9 L capacity with 5.5 gpm pump flow |
Massey Ferguson 3690 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 3690 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Wet disc brakes |
Massey Ferguson 3690 Hydraulic Capacity FAQ
Is the Massey Ferguson 3690 hydraulic capacity big or small for its size?
The Massey Ferguson 3690 lists 19.8 gal | 74.9 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 3690 hydraulics feel fast or slow?
The useful speed clue is 5.5 gpm (low-pressure element) | 20.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 3690 hydraulic pressure tell you?
The pressure spec is 247 psi (low-pressure element) | 17.0 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Massey Ferguson 3690?
On the Massey Ferguson 3690, 5.5 gpm (low-pressure element) | 20.8 lpm pump flow points to slower loader and cylinder movement, 247 psi pressure affects force more than speed, and 10,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3690?
For implement matching, the useful checks are 5.5 gpm flow, 247 psi pressure, 10,000 lb listed lift, and 2 or 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3690 rear lift capacity strong?
The listed lift figure is 10000 lbs | 4536 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 3690 hydraulic remotes enough?
The Massey Ferguson 3690 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 3690 hydraulics handle long hydraulic jobs?
The useful heat clues are 19.8 gal of hydraulic capacity, 5.5 gpm flow, 247 psi pressure, and about 0.8 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the Massey Ferguson 3690 make on paper?
Using 247 psi and 5.5 gpm, the rough pressure-flow estimate is about 0.8 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3690 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III, hitch control is position and electronic draft control, and listed lift is 10000 lbs | 4536 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
