The Massey Ferguson 1140 tractor hydraulic capacity is 6.6 gal | 25.0 L, pump flow is 6.9 gpm | 26.1 lpm, and hydraulic pressure is 2133 psi | 147.1 bar.
Massey Ferguson 1140 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic capacity | 6.6 gal | 25.0 L |
| Hydraulic pressure | 2133 psi | 147.1 bar |
| Pump flow | 6.9 gpm | 26.1 lpm |
| Hydraulic valves | 2 Optional |
Massey Ferguson 1140 Hitch, Remote & Lift Specs
| Rear hitch type | I |
|---|---|
| Rear hitch control | position control |
| Rear lift at ends | 2866 lbs | 1300 kg |
| Rear lift at 24 inches | 1785 lbs | 809 kg |
Massey Ferguson 1140 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 1 minutes at rated pump flow |
| Rear lift per pump gpm | 258.7 lb per gpm |
| Rear lift per hydraulic gallon | 270.5 lb per gal |
| Estimated hydraulic horsepower | about 8.6 hydraulic hp from listed pressure and pump flow |
| Metric capacity vs pump flow | 25 L capacity with 6.9 gpm pump flow |
Massey Ferguson 1140 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 1140 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Mechanical wet disc brakes |
Massey Ferguson 1140 Hydraulic Capacity FAQ
Is the Massey Ferguson 1140 hydraulic capacity big or small for its size?
The Massey Ferguson 1140 lists 6.6 gal | 25.0 L of hydraulic capacity, which is close to the 6.5 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Massey Ferguson 1140 hydraulics feel fast or slow?
The useful speed clue is 6.9 gpm | 26.1 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 1140 hydraulic pressure tell you?
The pressure spec is 2133 psi | 147.1 bar, close to the 2,300 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 1140?
On the Massey Ferguson 1140, 6.9 gpm | 26.1 lpm pump flow points to slower loader and cylinder movement, 2,133 psi pressure affects force more than speed, and 1,785 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1140?
For implement matching, the useful checks are 6.9 gpm flow, 2,133 psi pressure, 1,785 lb listed lift, and 2 Optional remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 1140 rear lift capacity strong?
The listed lift figure is 1785 lbs | 809 kg, close to the 1,800 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Massey Ferguson 1140 hydraulic remotes enough?
The Massey Ferguson 1140 remote/valve listing is 2 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 1140 hydraulics handle long hydraulic jobs?
The useful heat clues are 6.6 gal of hydraulic capacity, 6.9 gpm flow, 2,133 psi pressure, and about 8.6 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 1140 make on paper?
Using 2,133 psi and 6.9 gpm, the rough pressure-flow estimate is about 8.6 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 1140 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position control, and listed lift is 1785 lbs | 809 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
