Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 292 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 292, but pump flow is 11.1 gpm | 42.0 lpm and lift is listed as 7055 lbs | 3200 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 292 hydraulics feel fast or slow?
The useful speed clue is 11.1 gpm | 42.0 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson 292?
On the Massey Ferguson 292, 11.1 gpm | 42.0 lpm pump flow points to slower loader and cylinder movement and 7,055 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 292?
For implement matching, the useful checks are 11.1 gpm flow and 7,055 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 292 rear lift capacity strong?
The listed lift figure is 7055 lbs | 3200 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Will the Massey Ferguson 292 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Massey Ferguson 292 hydraulics?
For service planning, flow is listed at 11.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
