The Case IH Steiger 370 tractor hydraulic capacity is 62.5 gal | 236.6 L, pump flow is 40 gpm | 151.4 lpm, and hydraulic type is closed center load sensing.
Case IH Steiger 370 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Hydraulic capacity | 62.5 gal | 236.6 L |
| Pump flow | 40 gpm | 151.4 lpm |
| SCV flow | 35 gpm | 132.5 lpm |
| Hydraulic valves | 4 to 8 |
Case IH Steiger 370 Hitch, Remote & Lift Specs
| Rear hitch type | IVN |
|---|---|
| Rear lift at 24 inches | 20000 lbs | 9072 kg |
| Drawbar category | Cat. 4 |
Case IH Steiger 370 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 0.6 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 1.6 minutes at rated pump flow |
| SCV flow vs pump flow | 87.5% of listed pump flow |
| Rear lift per pump gpm | 500 lb per gpm |
| Rear lift per hydraulic gallon | 320 lb per gal |
| Metric capacity vs pump flow | 236.6 L capacity with 40 gpm pump flow |
Case IH Steiger 370 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Steiger 370 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydraulic articulated |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
Case IH Steiger 370 Hydraulic Capacity FAQ
Is the Case IH Steiger 370 hydraulic capacity big or small for its size?
The Case IH Steiger 370 lists 62.5 gal | 236.6 L of hydraulic capacity, above the 42 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH Steiger 370 hydraulics feel fast or slow?
The useful speed clue is 40 gpm | 151.4 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Steiger 370?
On the Case IH Steiger 370, 40 gpm | 151.4 lpm pump flow points to slower loader and cylinder movement and 20,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Steiger 370?
For implement matching, the useful checks are 40 gpm flow, 20,000 lb listed lift, 4 to 8 remote/valve listing, and IVN hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, better suited to heavier mounted implements, and has more oil volume in reserve for heat control and continuous hydraulic work, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Steiger 370 rear lift capacity strong?
The listed lift figure is 20000 lbs | 9072 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Steiger 370 hydraulic remotes enough?
The Case IH Steiger 370 remote/valve listing is 4 to 8. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Steiger 370 hydraulics handle long hydraulic jobs?
The useful heat clues are 62.5 gal of hydraulic capacity and 40 gpm flow. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
What do the Case IH Steiger 370 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN and listed lift is 20000 lbs | 9072 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Steiger 370 use?
The hydraulic system is listed as closed center load sensing with 40 gpm | 151.4 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Steiger 370 hydraulics?
For service planning, the oil-volume figure is 62.5 gal | 236.6 L, the system is listed as closed center load sensing, and flow is listed at 40 gpm. Because this is a larger system, buying oil short or draining without checking the manual gets expensive fast.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
