The Case IH Puma 225 tractor hydraulic capacity is 26.5 gal | 100.3 L, pump flow is 39.6 gpm | 149.9 lpm, and hydraulic type is pressure flow compensating (PFC).
Case IH Puma 225 Hydraulic Capacity & Flow Specs
| Hydraulic type | pressure flow compensating (PFC) |
|---|---|
| Hydraulic capacity | 26.5 gal | 100.3 L |
| Pump flow | 39.6 gpm | 149.9 lpm |
| Total hydraulic flow | 56.6 gpm | 214.2 lpm |
| Steering flow | 17 gpm | 64.3 lpm |
| Hydraulic valves | 3 to 5 |
Case IH Puma 225 Hitch, Remote & Lift Specs
| Rear hitch type | 2/3N |
|---|---|
| Rear lift at ends | 12,787 lbs | 5800 kg |
| Rear lift at 24 inches | 10,900 lbs | 4944 kg |
Case IH Puma 225 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.5 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.7 minutes at rated pump flow |
| Total flow vs pump flow | 142.9% of listed pump flow |
| Steering flow vs pump flow | 42.9% of listed pump flow |
| Rear lift per pump gpm | 275.3 lb per gpm |
| Rear lift per hydraulic gallon | 411.3 lb per gal |
| Metric capacity vs pump flow | 100.3 L capacity with 39.6 gpm pump flow |
Case IH Puma 225 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Puma 225 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
Case IH Puma 225 Hydraulic Capacity FAQ
Is the Case IH Puma 225 hydraulic capacity big or small for its size?
The Case IH Puma 225 lists 26.5 gal | 100.3 L of hydraulic capacity, above the 18 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH Puma 225 hydraulics feel fast or slow?
The useful speed clue is 39.6 gpm | 149.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Puma 225?
On the Case IH Puma 225, 39.6 gpm | 149.9 lpm pump flow points to quicker loader and cylinder movement and 10,900 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Puma 225?
For implement matching, the useful checks are 39.6 gpm flow, 10,900 lb listed lift, 3 to 5 remote/valve listing, and 2/3N hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, better suited to heavier mounted implements, and has more oil volume in reserve for heat control and continuous hydraulic work, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Puma 225 rear lift capacity strong?
The listed lift figure is 10,900 lbs | 4944 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Puma 225 hydraulic remotes enough?
The Case IH Puma 225 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Puma 225 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.5 gal of hydraulic capacity and 39.6 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the Case IH Puma 225 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/3N and listed lift is 10,900 lbs | 4944 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Puma 225 use?
The hydraulic system is listed as pressure flow compensating (PFC) with 39.6 gpm | 149.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Puma 225 hydraulics?
For service planning, the oil-volume figure is 26.5 gal | 100.3 L, the system is listed as pressure flow compensating (PFC), and flow is listed at 39.6 gpm. Because this is a larger system, buying oil short or draining without checking the manual gets expensive fast.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
