The Case IH Puma 165 X tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 29.1 gpm | 110.1 lpm, hydraulic pressure is 3045 psi | 210.0 bar, and hydraulic type is pressure flow compensated.
Hydraulic Flow29.1 gpm | 110.1 lpm
Pressure3045 psi | 210.0 bar
Hydraulic Typepressure flow compensated
Valves / Remotes4
Lift Capacity14586 lbs | 6616 kg
Case IH Puma 165 X Hydraulic Capacity & Flow Specs
Hydraulic type
pressure flow compensated
Hydraulic pressure
3045 psi | 210.0 bar
Pump flow
29.1 gpm | 110.1 lpm
Rear remotes
4
Case IH Puma 165 X Hitch, Remote & Lift Specs
Rear hitch type
III/II
Rear hitch control
electronic draft control
Rear lift at 24 inches
14586 lbs | 6616 kg
Front lift
7873 lbs | 3571 kg
Case IH Puma 165 X Useful Hydraulic Calculations
Rear lift per pump gpm
501.2 lb per gpm
Estimated hydraulic horsepower
about 51.7 hydraulic hp from listed pressure and pump flow
Pump flow per listed valve
7.3 gpm per valve
Case IH Puma 165 X Hydraulic Comparison Charts
Pump flow comparison
This model
29.1 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
3,045 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
14,586 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Valve / remote count comparison
This model
4
Average
5
Low
3
High
8
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Puma 165 X Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Trailer brakes
hydraulic
Differential lock
rear standard
Case IH Puma 165 X Hydraulic Capacity FAQ
Why is the Case IH Puma 165 X hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Puma 165 X, but pump flow is 29.1 gpm | 110.1 lpm, pressure is 3045 psi | 210.0 bar, system type is pressure flow compensated, and lift is listed as 14586 lbs | 6616 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Puma 165 X hydraulics feel fast or slow?
The useful speed clue is 29.1 gpm | 110.1 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH Puma 165 X hydraulic pressure tell you?
The pressure spec is 3045 psi | 210.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH Puma 165 X?
On the Case IH Puma 165 X, 29.1 gpm | 110.1 lpm pump flow points to slower loader and cylinder movement, 3,045 psi pressure affects force more than speed, and 14,586 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Puma 165 X?
For implement matching, the useful checks are 29.1 gpm flow, 3,045 psi pressure, 14,586 lb listed lift, and 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Puma 165 X rear lift capacity strong?
The listed lift figure is 14586 lbs | 6616 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Puma 165 X hydraulic remotes enough?
The Case IH Puma 165 X lists 4 for valves/remotes. That is slightly under the 5 benchmark, but still a workable/normal remote count for many setups.
Will the Case IH Puma 165 X hydraulics handle long hydraulic jobs?
The useful heat clues are 29.1 gpm flow, 3,045 psi pressure, and about 51.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH Puma 165 X make on paper?
Using 3,045 psi and 29.1 gpm, the rough pressure-flow estimate is about 51.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH Puma 165 X hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/II, hitch control is electronic draft control, and listed lift is 14586 lbs | 6616 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
