The Case IH Maxxum 135 tractor hydraulic capacity is 19.5 gal | 73.8 L, pump flow is 21.1 gpm | 79.9 lpm, and hydraulic type is open center.
Case IH Maxxum 135 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic capacity | 19.5 gal | 73.8 L |
| Pump flow | 21.1 gpm | 79.9 lpm |
| Total hydraulic flow | 33.5 gpm | 126.8 lpm |
| Steering flow | 12.4 gpm | 46.9 lpm |
| SCV flow | 19.8 gpm | 74.9 lpm |
| Rear remotes | 2 to 4 |
Case IH Maxxum 135 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | electronic lower-link draft sensing |
| Rear lift at 24 inches | 6200 lbs | 2812 kg |
| Drawbar category | Cat. 3 |
Case IH Maxxum 135 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.1 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.9 minutes at rated pump flow |
| Total flow vs pump flow | 158.8% of listed pump flow |
| SCV flow vs pump flow | 93.8% of listed pump flow |
| Steering flow vs pump flow | 58.8% of listed pump flow |
| Rear lift per pump gpm | 293.8 lb per gpm |
| Rear lift per hydraulic gallon | 317.9 lb per gal |
| Metric capacity vs pump flow | 73.8 L capacity with 21.1 gpm pump flow |
Case IH Maxxum 135 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Maxxum 135 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
Case IH Maxxum 135 Hydraulic Capacity FAQ
Is the Case IH Maxxum 135 hydraulic capacity big or small for its size?
The Case IH Maxxum 135 lists 19.5 gal | 73.8 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH Maxxum 135 hydraulics feel fast or slow?
The useful speed clue is 21.1 gpm | 79.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Maxxum 135?
On the Case IH Maxxum 135, 21.1 gpm | 79.9 lpm pump flow points to quicker loader and cylinder movement and 6,200 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Maxxum 135?
For implement matching, the useful checks are 21.1 gpm flow, 6,200 lb listed lift, 2 to 4 remote/valve listing, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Maxxum 135 rear lift capacity strong?
The listed lift figure is 6200 lbs | 2812 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Maxxum 135 hydraulic remotes enough?
The Case IH Maxxum 135 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Maxxum 135 hydraulics handle long hydraulic jobs?
The useful heat clues are 19.5 gal of hydraulic capacity and 21.1 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the Case IH Maxxum 135 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower-link draft sensing, and listed lift is 6200 lbs | 2812 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Maxxum 135 use?
The hydraulic system is listed as open center with 21.1 gpm | 79.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Maxxum 135 hydraulics?
For service planning, the oil-volume figure is 19.5 gal | 73.8 L, the system is listed as open center, and flow is listed at 21.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
