The Case IH Magnum 370 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic type is variable displacement pressure flow compensating (PFC), and valves/remotes are listed as 4 to 6.
Case IH Magnum 370 Hydraulic Capacity & Flow Specs
| Hydraulic type | variable displacement pressure flow compensating (PFC) |
|---|---|
| Optional pump flow | 44 gpm | 166.5 lpm | 59 gpm (Optional) | 223.3 lpm |
| Hydraulic valves | 4 to 6 |
Case IH Magnum 370 Hitch, Remote & Lift Specs
| Rear hitch type | IVN/III | IVN/III III (Optional) |
|---|---|
| Rear hitch control | electronic lower link draft sensning |
| Rear lift at 24 inches | 17500 lbs | 7938 kg |
| Drawbar category | Cat. 4 |
Case IH Magnum 370 Hydraulic Comparison Charts
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Magnum 370 Hydraulic Capacity FAQ
Why is the Case IH Magnum 370 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Magnum 370, but system type is variable displacement pressure flow compensating (PFC) and lift is listed as 17500 lbs | 7938 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
What matters most for loader speed on the Case IH Magnum 370?
On the Case IH Magnum 370, pump/remote flow is not listed here, so loader speed cannot be judged from this page alone and 17,500 lb listed lift is the number to watch for implement weight. You need the pump-flow or remote-flow spec to judge speed; pressure and lift only tell you force/capacity.
How do you judge hydraulic implement fit on the Case IH Magnum 370?
For implement matching, the useful checks are 17,500 lb listed lift, 4 to 6 remote/valve listing, and IVN/III | IVN/III III (Optional) hitch. That combination is better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Magnum 370 rear lift capacity strong?
The listed lift figure is 17500 lbs | 7938 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Magnum 370 hydraulic remotes enough?
The Case IH Magnum 370 remote/valve listing is 4 to 6. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
What do the Case IH Magnum 370 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN/III | IVN/III III (Optional), hitch control is electronic lower link draft sensning, and listed lift is 17500 lbs | 7938 kg. Hitch category gets the implement connected and lift capacity gets it raised; pump flow still needs checking separately if cylinder speed matters.
What hydraulic system does the Case IH Magnum 370 use?
The hydraulic system is listed as variable displacement pressure flow compensating (PFC). The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Magnum 370 hydraulics?
For service planning, the system is listed as variable displacement pressure flow compensating (PFC). Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
