The Case IH Magnum 240 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 43 gpm | 162.8 lpm, hydraulic type is pressure flow compensating, and valves/remotes are listed as 3 to 5.
Case IH Magnum 240 Hydraulic Capacity & Flow Specs
| Hydraulic type | pressure flow compensating |
|---|---|
| Pump flow | 43 gpm | 162.8 lpm |
| Rear remotes | 3 to 5 |
Case IH Magnum 240 Hitch, Remote & Lift Specs
| Rear hitch type | III/IIIN |
|---|---|
| Rear hitch control | electronic lower link draft sensing |
| Rear lift at 24 inches | 14100 lbs | 6395 kg |
| Drawbar category | Cat. 3 |
Case IH Magnum 240 Useful Hydraulic Calculations
| Rear lift per pump gpm | 327.9 lb per gpm |
|---|
Case IH Magnum 240 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Magnum 240 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
Case IH Magnum 240 Hydraulic Capacity FAQ
Why is the Case IH Magnum 240 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Magnum 240, but pump flow is 43 gpm | 162.8 lpm, system type is pressure flow compensating, and lift is listed as 14100 lbs | 6395 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Magnum 240 hydraulics feel fast or slow?
The useful speed clue is 43 gpm | 162.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Magnum 240?
On the Case IH Magnum 240, 43 gpm | 162.8 lpm pump flow points to slower loader and cylinder movement and 14,100 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Magnum 240?
For implement matching, the useful checks are 43 gpm flow, 14,100 lb listed lift, 3 to 5 remote/valve listing, and III/IIIN hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Magnum 240 rear lift capacity strong?
The listed lift figure is 14100 lbs | 6395 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Magnum 240 hydraulic remotes enough?
The Case IH Magnum 240 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Magnum 240 hydraulics handle long hydraulic jobs?
The useful heat clues are 43 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Magnum 240 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN, hitch control is electronic lower link draft sensing, and listed lift is 14100 lbs | 6395 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Magnum 240 use?
The hydraulic system is listed as pressure flow compensating with 43 gpm | 162.8 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Magnum 240 hydraulics?
For service planning, the system is listed as pressure flow compensating and flow is listed at 43 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
