The Case IH MXU135 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26.5 gpm | 100.3 lpm, hydraulic pressure is 3118 psi | 215.0 bar, and hydraulic type is closed-center load sensing.
Hydraulic Flow26.5 gpm | 100.3 lpm
Pressure3118 psi | 215.0 bar
Hydraulic Typeclosed-center load sensing
Valves / Remotes2 to 4
Lift Capacity12185 lbs | 5527 kg
Case IH MXU135 Hydraulic Capacity & Flow Specs
Hydraulic type
closed-center load sensing
Hydraulic pressure
3118 psi | 215.0 bar
Pump flow
26.5 gpm | 100.3 lpm
Total hydraulic flow
37 gpm | 140.0 lpm
Steering flow
10.5 gpm | 39.7 lpm
Rear remotes
2 to 4
Case IH MXU135 Hitch, Remote & Lift Specs
Rear hitch type
IIIN/II
Rear hitch control
electronic draft control
Rear lift at 24 inches
12185 lbs | 5527 kg
Case IH MXU135 Useful Hydraulic Calculations
Total flow vs pump flow
139.6% of listed pump flow
Steering flow vs pump flow
39.6% of listed pump flow
Rear lift per pump gpm
459.8 lb per gpm
Estimated hydraulic horsepower
about 48.2 hydraulic hp from listed pressure and pump flow
Case IH MXU135 Hydraulic Comparison Charts
Pump flow comparison
This model
26.5 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
3,118 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
12,185 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MXU135 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Differential lock
electro-hydraulic rear
Case IH MXU135 Hydraulic Capacity FAQ
Why is the Case IH MXU135 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH MXU135, but pump flow is 26.5 gpm | 100.3 lpm, pressure is 3118 psi | 215.0 bar, system type is closed-center load sensing, and lift is listed as 12185 lbs | 5527 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH MXU135 hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH MXU135 hydraulic pressure tell you?
The pressure spec is 3118 psi | 215.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH MXU135?
On the Case IH MXU135, 26.5 gpm | 100.3 lpm pump flow points to slower loader and cylinder movement, 3,118 psi pressure affects force more than speed, and 12,185 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MXU135?
For implement matching, the useful checks are 26.5 gpm flow, 3,118 psi pressure, 12,185 lb listed lift, and 2 to 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MXU135 rear lift capacity strong?
The listed lift figure is 12185 lbs | 5527 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH MXU135 hydraulic remotes enough?
The Case IH MXU135 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MXU135 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.5 gpm flow, 3,118 psi pressure, and about 48.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH MXU135 make on paper?
Using 3,118 psi and 26.5 gpm, the rough pressure-flow estimate is about 48.2 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH MXU135 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IIIN/II, hitch control is electronic draft control, and listed lift is 12185 lbs | 5527 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
