The Case IH JX80 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 21.7 gpm | 82.1 lpm, hydraulic pressure is 2755 psi | 190.0 bar, and hydraulic type is open center.
Case IH JX80 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2755 psi | 190.0 bar |
| Optional pump flow | 10.6 gpm | 40.1 lpm | 13.6 gpm (Optional, standard in USA) | 51.5 lpm |
| Total hydraulic flow | 21.7 gpm | 82.1 lpm |
| Steering flow | 8.1 gpm | 30.7 lpm |
| Hydraulic valves | 1 to 3, 1 mid Optional |
Case IH JX80 Hitch, Remote & Lift Specs
| Rear hitch type | II/I |
|---|---|
| Rear hitch control | mechanical draft sensing |
| Rear lift at 24 inches | 5,025 lbs | 2279 kg |
Case IH JX80 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH JX80 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | hydraulic wet disc |
| Differential lock | mechanical rear |
Case IH JX80 Hydraulic Capacity FAQ
Why is the Case IH JX80 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH JX80, but total hydraulic flow is 21.7 gpm | 82.1 lpm, pressure is 2755 psi | 190.0 bar, system type is open center, and lift is listed as 5,025 lbs | 2279 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH JX80 hydraulics feel fast or slow?
The useful speed clue is 21.7 gpm | 82.1 lpm total hydraulic flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH JX80 hydraulic pressure tell you?
The pressure spec is 2755 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH JX80?
On the Case IH JX80, 21.7 gpm | 82.1 lpm total hydraulic flow points to quicker loader and cylinder movement, 2,755 psi pressure affects force more than speed, and 5,025 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH JX80?
For implement matching, the useful checks are 21.7 gpm flow, 2,755 psi pressure, 5,025 lb listed lift, and 1 to 3, 1 mid Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH JX80 rear lift capacity strong?
The listed lift figure is 5,025 lbs | 2279 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH JX80 hydraulic remotes enough?
The Case IH JX80 remote/valve listing is 1 to 3, 1 mid Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH JX80 hydraulics handle long hydraulic jobs?
The useful heat clues are 21.7 gpm flow, 2,755 psi pressure, and about 34.9 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH JX80 make on paper?
Using 2,755 psi and 21.7 gpm, the rough pressure-flow estimate is about 34.9 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH JX80 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is mechanical draft sensing, and listed lift is 5,025 lbs | 2279 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
