The Case IH JX75 Maxxima tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 13.6 gpm | 51.5 lpm, hydraulic type is open center, and valves/remotes are listed as 3.
Hydraulic Flow13.6 gpm | 51.5 lpm
Hydraulic Typeopen center
Valves / Remotes3
Lift Capacity7718 lbs * Advertised. 3440 lbs actual lift during testing 3500 kg
Case IH JX75 Maxxima Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
13.6 gpm | 51.5 lpm
Hydraulic valves
3
Case IH JX75 Maxxima Hitch, Remote & Lift Specs
Rear hitch type
II
Rear lift
7718 lbs * Advertised. 3440 lbs actual lift during testing 3500 kg
Case IH JX75 Maxxima Useful Hydraulic Calculations
Rear lift per pump gpm
567.5 lb per gpm
Pump flow per listed valve
4.5 gpm per valve
Case IH JX75 Maxxima Hydraulic Comparison Charts
Pump flow comparison
This model
13.6 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
7,718 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Valve / remote count comparison
This model
3
Average
2
Low
1
High
4
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH JX75 Maxxima Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Independent wet disc brakes
Differential lock
mechanical rear
Case IH JX75 Maxxima Hydraulic Capacity FAQ
Why is the Case IH JX75 Maxxima hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH JX75 Maxxima, but pump flow is 13.6 gpm | 51.5 lpm, system type is open center, and lift is listed as 7718 lbs * Advertised. 3440 lbs actual lift during testing 3500 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH JX75 Maxxima hydraulics feel fast or slow?
The useful speed clue is 13.6 gpm | 51.5 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the Case IH JX75 Maxxima?
On the Case IH JX75 Maxxima, 13.6 gpm | 51.5 lpm pump flow is around normal for loader/cylinder speed and 7,718 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH JX75 Maxxima?
For implement matching, the useful checks are 13.6 gpm flow, 7,718 lb listed lift, 3 remote/valve listing, and II hitch. That combination is in the normal flow range for this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH JX75 Maxxima rear lift capacity strong?
The listed lift figure is 7718 lbs * Advertised. 3440 lbs actual lift during testing 3500 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH JX75 Maxxima hydraulic remotes enough?
The Case IH JX75 Maxxima lists 3 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the Case IH JX75 Maxxima hydraulics handle long hydraulic jobs?
The useful heat clues are 13.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH JX75 Maxxima hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 7718 lbs * Advertised. 3440 lbs actual lift during testing 3500 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH JX75 Maxxima use?
The hydraulic system is listed as open center with 13.6 gpm | 51.5 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH JX75 Maxxima hydraulics?
For service planning, the system is listed as open center and flow is listed at 13.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
