The Case IH Farmall DX48 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 17.55 gpm | 66.4 lpm, and hydraulic type is open center.
Case IH Farmall DX48 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Total hydraulic flow | 17.55 gpm | 66.4 lpm |
Case IH Farmall DX48 Hitch, Remote & Lift Specs
| Rear hitch type | II/I |
|---|---|
| Rear lift at 24 inches | 3465 lbs | 1571 kg |
Case IH Farmall DX48 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall DX48 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | mechanical wet disc brakes |
Case IH Farmall DX48 Hydraulic Capacity FAQ
Why is the Case IH Farmall DX48 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall DX48, but total hydraulic flow is 17.55 gpm | 66.4 lpm, system type is open center, and lift is listed as 3465 lbs | 1571 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall DX48 hydraulics feel fast or slow?
The useful speed clue is 17.55 gpm | 66.4 lpm total hydraulic flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Farmall DX48?
On the Case IH Farmall DX48, 17.55 gpm | 66.4 lpm total hydraulic flow points to quicker loader and cylinder movement and 3,465 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall DX48?
For implement matching, the useful checks are 17.6 gpm flow, 3,465 lb listed lift, and II/I hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall DX48 rear lift capacity strong?
The listed lift figure is 3465 lbs | 1571 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Case IH Farmall DX48 hydraulics handle long hydraulic jobs?
The useful heat clues are 17.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall DX48 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I and listed lift is 3465 lbs | 1571 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall DX48 use?
The hydraulic system is listed as open center with 17.55 gpm | 66.4 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall DX48 hydraulics?
For service planning, the system is listed as open center and flow is listed at 17.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
