The Case IH Farmall 40 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.8 gpm | 37.1 lpm, and hydraulic type is open center.
Case IH Farmall 40 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Pump flow | 9.8 gpm | 37.1 lpm |
| Total hydraulic flow | 14.9 gpm | 56.4 lpm |
| Steering flow | 5.1 gpm | 19.3 lpm |
Case IH Farmall 40 Hitch, Remote & Lift Specs
| Rear hitch type | I |
|---|---|
| Rear hitch control | position control |
| Rear lift at 24 inches | 2330 lbs | 1056 kg |
Case IH Farmall 40 Useful Hydraulic Calculations
| Total flow vs pump flow | 152% of listed pump flow |
|---|---|
| Steering flow vs pump flow | 52% of listed pump flow |
| Rear lift per pump gpm | 237.8 lb per gpm |
Case IH Farmall 40 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 40 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
Case IH Farmall 40 Hydraulic Capacity FAQ
Why is the Case IH Farmall 40 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 40, but pump flow is 9.8 gpm | 37.1 lpm, system type is open center, and lift is listed as 2330 lbs | 1056 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 40 hydraulics feel fast or slow?
The useful speed clue is 9.8 gpm | 37.1 lpm pump flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Farmall 40?
On the Case IH Farmall 40, 9.8 gpm | 37.1 lpm pump flow points to quicker loader and cylinder movement and 2,330 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 40?
For implement matching, the useful checks are 9.8 gpm flow, 2,330 lb listed lift, and I hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 40 rear lift capacity strong?
The listed lift figure is 2330 lbs | 1056 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Case IH Farmall 40 hydraulics handle long hydraulic jobs?
The useful heat clues are 9.8 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall 40 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position control, and listed lift is 2330 lbs | 1056 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall 40 use?
The hydraulic system is listed as open center with 9.8 gpm | 37.1 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall 40 hydraulics?
For service planning, the system is listed as open center and flow is listed at 9.8 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
