The New Holland TB110 tractor engine horsepower is 110 hp | 82.0 kW, and PTO horsepower is 90 hp | 67.1 kW.
New Holland TB110 Horsepower Specs
| Engine horsepower | 110 hp | 82.0 kW |
|---|---|
| PTO horsepower claimed | 90 hp | 67.1 kW |
New Holland TB110 Useful Horsepower Calculations
| PTO-to-engine power transfer | 81.8% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 3.4 ci per PTO hp |
| PTO horsepower per liter | 18 PTO hp per L |
| Engine size per engine horsepower | 2.8 ci per engine hp |
| Engine horsepower per liter | 22 engine hp per L |
| Torque per PTO horsepower | 2.8 lb-ft per PTO hp |
| Fuel tank per PTO horsepower | 0.4 gal per PTO hp |
| Rated speed per PTO horsepower | 23.3 rpm per PTO hp |
New Holland TB110 Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 304 ci | 5.0 L |
| Bore and stroke | 4.40×5.00 inches | 112 x 127 mm |
| Rated RPM | 2100 |
| Torque | 249 lb-ft | 337.6 Nm |
| Torque RPM | 1200 |
New Holland TB110 Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 37 gal | 140.0 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
New Holland TB110 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland TB110 Horsepower FAQ
How much horsepower does the New Holland TB110 have?
The listed engine output is 110 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 110 hp.
How much PTO horsepower does the New Holland TB110 have?
The listed PTO output is 90 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 90 hp.
How much engine power reaches the PTO on the New Holland TB110?
The PTO-to-engine transfer works out to 81.8%, from 110 engine hp to 90 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the New Holland TB110 engine?
The engine displacement is 304 ci, above the 260 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the New Holland TB110 engine stressed for its PTO horsepower?
The engine has about 3.4 cubic inches per PTO hp, using 304 ci and 90 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the New Holland TB110 make?
The output density is about 18 PTO hp per liter, using 90 PTO hp and 5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the New Holland TB110 have?
The listed torque is 249 lb-ft, close to the 240 lb-ft benchmark average. The 249 lb-ft figure is a normal torque result for this class.
Does the New Holland TB110 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 2.8 lb-ft per PTO hp, using 249 lb-ft and 90 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the New Holland TB110 rated at?
The rated speed is 2,100 rpm, close to the 2,200 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
