New Holland 9684 Horsepower & PTO HP

Quick answer:

The New Holland 9684 tractor engine horsepower is 360 hp | 268.5 kW, PTO horsepower is 349.1 hp | 260.3 kW, and the drawbar horsepower is 277.2 hp | 206.7 kW.

Engine HP360 hp | 268.5 kW
PTO HP349.1 hp | 260.3 kW
Drawbar HP277.2 hp | 206.7 kW
PTO Transfer97%
Torque1215 lb-ft | 1647.5 Nm
Displacement855 ci | 14.0 L

New Holland 9684 Horsepower Specs

Engine gross horsepower 360 hp | 268.5 kW
PTO horsepower tested 349.1 hp | 260.3 kW
Drawbar horsepower tested 277.2 hp | 206.7 kW

New Holland 9684 Useful Horsepower Calculations

PTO-to-engine power transfer 97% of engine hp reaches the PTO
Drawbar-to-engine power transfer 77% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 79.4% drawbar hp vs PTO hp
Engine size per PTO horsepower 2.4 ci per PTO hp
PTO horsepower per liter 24.9 PTO hp per L
Engine size per engine horsepower 2.4 ci per engine hp
Engine horsepower per liter 25.7 engine hp per L
Torque per PTO horsepower 3.5 lb-ft per PTO hp
Fuel tank per PTO horsepower 0.7 gal per PTO hp

New Holland 9684 Engine Specs

Engine type turbocharged aftercooled diesel
Displacement 855 ci | 14.0 L
Bore and stroke 5.50×6.00 inches | 140 x 152 mm
Compression 18.5:1
Rated RPM 2100
Torque 1215 lb-ft | 1647.5 Nm
Torque RPM 1400

New Holland 9684 Fuel, Cooling, Starting & Service Specs

Fuel capacity 230 gal | 870.6 L
Starter volts 12
Battery volts 12
Firing order 1-5-3-6-2-4
Idle RPM 825-2400

New Holland 9684 Horsepower Comparison Charts

Engine horsepower comparison

This model

360 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

349.1 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

277.2 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

855 ci

Average

520 ci

Low

360 ci

High

750 ci

Torque comparison

This model

1,215 lb-ft

Average

700 lb-ft

Low

350 lb-ft

High

1,250 lb-ft

Rated RPM comparison

This model

2,100 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

2.4 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

New Holland 9684 Horsepower FAQ

How much horsepower does the New Holland 9684 have?

The listed engine output is 360 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 360 hp.

How much PTO horsepower does the New Holland 9684 have?

The listed PTO output is 349.1 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 349.1 hp.

How much drawbar horsepower does the New Holland 9684 have?

The listed drawbar output is 277.2 hp, above the 150 hp benchmark average. That makes the 277.2 hp drawbar number more useful than engine hp for tillage and heavy pulling.

How much engine power reaches the PTO on the New Holland 9684?

The PTO-to-engine transfer works out to 97%, from 360 engine hp to 349.1 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.

How efficient is the New Holland 9684 for pulling work?

The drawbar-to-engine transfer is about 77%, from 360 engine hp to 277.2 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the New Holland 9684 better judged by PTO hp or drawbar hp?

The drawbar output is about 79.4% of PTO output, comparing 277.2 drawbar hp with 349.1 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the New Holland 9684 engine?

The engine displacement is 855 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.

Is the New Holland 9684 engine stressed for its PTO horsepower?

The engine has about 2.5 cubic inches per PTO hp, using 855 ci and 349.1 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the New Holland 9684 make?

The output density is about 24.9 PTO hp per liter, using 349.1 PTO hp and 14 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.