The New Holland 8260 tractor PTO horsepower is 100 hp | 74.6 kW, and the drawbar horsepower is 88 hp | 65.6 kW.
PTO HP100 hp | 74.6 kW
Drawbar HP88 hp | 65.6 kW
Displacement456 ci | 7.5 L
New Holland 8260 Horsepower Specs
PTO horsepower claimed
100 hp | 74.6 kW
PTO horsepower tested
107 hp | 79.8 kW
Drawbar horsepower tested
88 hp | 65.6 kW
New Holland 8260 Useful Horsepower Calculations
Drawbar-to-PTO power ratio
88% drawbar hp vs PTO hp
Engine size per PTO horsepower
4.6 ci per PTO hp
PTO horsepower per liter
13.3 PTO hp per L
Fuel tank per PTO horsepower
0.8 gal per PTO hp
Rated speed per PTO horsepower
22 rpm per PTO hp
New Holland 8260 Engine Specs
Displacement
456 ci | 7.5 L
Bore and stroke
4.5×5.0 inches | 114 x 127 mm
Compression
17.5:1
Rated RPM
2200
Torque RPM
1600
New Holland 8260 Fuel, Cooling, Starting & Service Specs
Fuel capacity
85 gal | 321.7 L
Starter volts
12
Starter power
4.9 hp | 3.7 kW
Battery volts
12
Firing order
1-5-3-6-2-4
Idle RPM
700-2420
Operating RPM
1500-2200
Intake valve clearance
0.016 inches (cold) | 0.406 mm
Exhaust valve clearance
0.018 inches (cold) | 0.457 mm
New Holland 8260 Horsepower Comparison Charts
PTO horsepower comparison
This model
100 hp
Average
65 hp
Low
35 hp
High
105 hp
Drawbar horsepower comparison
This model
88 hp
Average
55 hp
Low
30 hp
High
95 hp
Displacement comparison
This model
456 ci
Average
260 ci
Low
150 ci
High
380 ci
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
4.6 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland 8260 Horsepower FAQ
How much PTO horsepower does the New Holland 8260 have?
The listed PTO output is 100 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 100 hp.
How much drawbar horsepower does the New Holland 8260 have?
The listed drawbar output is 88 hp, above the 55 hp benchmark average. That makes the 88 hp drawbar number more useful than engine hp for tillage and heavy pulling.
Is the New Holland 8260 better judged by PTO hp or drawbar hp?
The drawbar output is about 88% of PTO output, comparing 88 drawbar hp with 100 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the New Holland 8260 engine?
The engine displacement is 456 ci, above the 260 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the New Holland 8260 engine stressed for its PTO horsepower?
The engine has about 4.6 cubic inches per PTO hp, using 456 ci and 100 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the New Holland 8260 make?
The output density is about 13.3 PTO hp per liter, using 100 PTO hp and 7.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the New Holland 8260 rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
