The Massey Ferguson 4233 tractor engine horsepower is 75 hp | 55.9 kW, PTO horsepower is 65 hp | 48.5 kW, and the drawbar horsepower is 60.2 hp | 44.9 kW.
Massey Ferguson 4233 Horsepower Specs
| Engine net horsepower | 75 hp | 55.9 kW |
|---|---|
| PTO horsepower claimed | 65 hp | 48.5 kW |
| PTO horsepower tested | 68.5 hp | 51.1 kW |
| Drawbar horsepower tested | 60.2 hp | 44.9 kW |
Massey Ferguson 4233 Useful Horsepower Calculations
| PTO-to-engine power transfer | 86.7% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 80.3% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 92.6% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 4 ci per PTO hp |
| PTO horsepower per liter | 15.5 PTO hp per L |
| Engine size per engine horsepower | 3.4 ci per engine hp |
| Engine horsepower per liter | 17.9 engine hp per L |
| Torque per PTO horsepower | 3.2 lb-ft per PTO hp |
| Fuel tank per PTO horsepower | 0.5 gal per PTO hp |
Massey Ferguson 4233 Engine Specs
| Displacement | 258 ci | 4.2 L |
|---|---|
| Bore and stroke | 4.05×5.00 inches | 103 x 127 mm |
| Compression | 17.3:1 |
| Rated RPM | 2200 |
| Torque | 207 lb-ft | 280.7 Nm |
| Torque RPM | 1300 |
Massey Ferguson 4233 Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 33.6 gal (cab) | 127.2 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
Massey Ferguson 4233 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 4233 Horsepower FAQ
How much horsepower does the Massey Ferguson 4233 have?
The listed engine output is 75 hp, close to the 80 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 75 hp as the main engine number.
How much PTO horsepower does the Massey Ferguson 4233 have?
The listed PTO output is 65 hp, close to the 65 hp benchmark average. Use 65 PTO hp as the practical implement-sizing number.
How much drawbar horsepower does the Massey Ferguson 4233 have?
The listed drawbar output is 60.2 hp, close to the 55 hp benchmark average. It gives a realistic pulling-power figure of about 60.2 hp.
How much engine power reaches the PTO on the Massey Ferguson 4233?
The PTO-to-engine transfer works out to 86.7%, from 75 engine hp to 65 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 4233 for pulling work?
The drawbar-to-engine transfer is about 80.3%, from 75 engine hp to 60.2 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 4233 better judged by PTO hp or drawbar hp?
The drawbar output is about 92.6% of PTO output, comparing 60.2 drawbar hp with 65 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 4233 engine?
The engine displacement is 258 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 4233 engine stressed for its PTO horsepower?
The engine has about 4 cubic inches per PTO hp, using 258 ci and 65 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 4233 make?
The output density is about 15.5 PTO hp per liter, using 65 PTO hp and 4.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
