Massey Ferguson 3210 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Firing order
1-2-3
Idle RPM
750-2475
Intake valve clearance
0.008 inches (cold) | 0.203 mm
Exhaust valve clearance
0.018 inches (cold) | 0.457 mm
Massey Ferguson 3210 Horsepower Comparison Charts
Engine horsepower comparison
This model
55 hp
Average
80 hp
Low
45 hp
High
120 hp
Displacement comparison
This model
164.8 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
142.4 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,300 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 3210 Horsepower FAQ
How much horsepower does the Massey Ferguson 3210 have?
The listed engine output is 55 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 55 hp.
How big is the Massey Ferguson 3210 engine?
The engine displacement is 164.8 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
How much torque does the Massey Ferguson 3210 have?
The listed torque is 142.4 lb-ft, below the 240 lb-ft benchmark average. With 142.4 lb-ft listed, gearing matters more when the tractor is loaded hard.
What rpm is the Massey Ferguson 3210 rated at?
The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
