Massey Ferguson 2745 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 2745 Horsepower Comparison Charts
PTO horsepower comparison
This model
140 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
122.3 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
539 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,600 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.9 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 2745 Horsepower FAQ
How much PTO horsepower does the Massey Ferguson 2745 have?
The listed PTO output is 140 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 140 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Massey Ferguson 2745 have?
The listed drawbar output is 122.3 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 122.3 hp at the drawbar before soil, ballast and tire limits are considered.
Is the Massey Ferguson 2745 better judged by PTO hp or drawbar hp?
The drawbar output is about 87.3% of PTO output, comparing 122.3 drawbar hp with 140 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 2745 engine?
The engine displacement is 539 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 2745 engine stressed for its PTO horsepower?
The engine has about 3.9 cubic inches per PTO hp, using 539 ci and 140 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 2745 make?
The output density is about 15.9 PTO hp per liter, using 140 PTO hp and 8.8 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 2745 rated at?
The rated speed is 2,600 rpm, above the 2,100 rpm benchmark average. A higher 2,600 rpm rating can make power well but may feel busier under load.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
