Massey Ferguson 1160 Fuel, Cooling, Starting & Service Specs
Fuel capacity
12.7 gal | 48.1 L
Starter volts
12
Battery volts
12
Massey Ferguson 1160 Horsepower Comparison Charts
Engine horsepower comparison
This model
41 hp
Average
35 hp
Low
15 hp
High
60 hp
PTO horsepower comparison
This model
37 hp
Average
28 hp
Low
12 hp
High
50 hp
Displacement comparison
This model
136.5 ci
Average
110 ci
Low
50 ci
High
180 ci
Torque comparison
This model
183 lb-ft
Average
95 lb-ft
Low
45 lb-ft
High
170 lb-ft
Rated RPM comparison
This model
2,500 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Engine size per PTO HP
This model
3.7 ci/hp
Average
3.1 ci/hp
Low
1.8 ci/hp
High
5 ci/hp
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 1160 Horsepower FAQ
How much horsepower does the Massey Ferguson 1160 have?
The listed engine output is 41 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 41 hp.
How much PTO horsepower does the Massey Ferguson 1160 have?
The listed PTO output is 37 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 37 hp.
How much engine power reaches the PTO on the Massey Ferguson 1160?
The PTO-to-engine transfer works out to 90.2%, from 41 engine hp to 37 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.
How big is the Massey Ferguson 1160 engine?
The engine displacement is 136.5 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 1160 engine stressed for its PTO horsepower?
The engine has about 3.7 cubic inches per PTO hp, using 136.5 ci and 37 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 1160 make?
The output density is about 16.8 PTO hp per liter, using 37 PTO hp and 2.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 1160 have?
The listed torque is 183 lb-ft, above the 95 lb-ft benchmark average. The 183 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Massey Ferguson 1160 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 5 lb-ft per PTO hp, using 183 lb-ft and 37 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 1160 rated at?
The rated speed is 2,500 rpm, close to the 2,400 rpm benchmark average. The 2,500 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
