Massey Ferguson 1080 Fuel, Cooling, Starting & Service Specs
Fuel capacity
42 gal (2WD) | 159.0 L
Starter volts
12
Battery volts
12
Massey Ferguson 1080 Horsepower Comparison Charts
PTO horsepower comparison
This model
80 hp
Average
65 hp
Low
35 hp
High
105 hp
Drawbar horsepower comparison
This model
70.2 hp
Average
55 hp
Low
30 hp
High
95 hp
Displacement comparison
This model
318 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
262 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,000 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
4 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 1080 Horsepower FAQ
How much PTO horsepower does the Massey Ferguson 1080 have?
The listed PTO output is 80 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 80 hp.
How much drawbar horsepower does the Massey Ferguson 1080 have?
The listed drawbar output is 70.2 hp, above the 55 hp benchmark average. That makes the 70.2 hp drawbar number more useful than engine hp for tillage and heavy pulling.
Is the Massey Ferguson 1080 better judged by PTO hp or drawbar hp?
The drawbar output is about 87.8% of PTO output, comparing 70.2 drawbar hp with 80 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 1080 engine?
The engine displacement is 318 ci, above the 260 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 1080 engine stressed for its PTO horsepower?
The engine has about 4 cubic inches per PTO hp, using 318 ci and 80 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 1080 make?
The output density is about 15.4 PTO hp per liter, using 80 PTO hp and 5.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 1080 have?
The listed torque is 262 lb-ft, close to the 240 lb-ft benchmark average. The 262 lb-ft figure is a normal torque result for this class.
Does the Massey Ferguson 1080 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.3 lb-ft per PTO hp, using 262 lb-ft and 80 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 1080 rated at?
The rated speed is 2,000 rpm, close to the 2,200 rpm benchmark average. The 2,000 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
