Massey Ferguson 680 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 680 Horsepower Comparison Charts
Engine horsepower comparison
This model
165 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
80 hp
Average
175 hp
Low
100 hp
High
320 hp
Displacement comparison
This model
365.3 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
479 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
4.6 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 680 Horsepower FAQ
How much horsepower does the Massey Ferguson 680 have?
The listed engine output is 165 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 165 hp.
How much PTO horsepower does the Massey Ferguson 680 have?
The listed PTO output is 80 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 80 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Massey Ferguson 680?
The PTO-to-engine transfer works out to 48.5%, from 165 engine hp to 80 PTO hp. That is a noticeable drop, so implement sizing should be conservative.
How big is the Massey Ferguson 680 engine?
The engine displacement is 365.3 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 680 engine stressed for its PTO horsepower?
The engine has about 4.6 cubic inches per PTO hp, using 365.3 ci and 80 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 680 make?
The output density is about 13.3 PTO hp per liter, using 80 PTO hp and 6 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 680 have?
The listed torque is 479 lb-ft, below the 700 lb-ft benchmark average. With 479 lb-ft listed, gearing matters more when the tractor is loaded hard.
Does the Massey Ferguson 680 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 6 lb-ft per PTO hp, using 479 lb-ft and 80 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 680 rated at?
The rated speed is 2,200 rpm, close to the 2,100 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
