The Massey Ferguson 292 tractor engine horsepower is 105 hp | 78.3 kW, and PTO horsepower is 93.5 hp | 69.7 kW.
Massey Ferguson 292 Horsepower Specs
| Engine horsepower | 105 hp | 78.3 kW |
|---|---|
| PTO horsepower claimed | 93.5 hp | 69.7 kW |
Massey Ferguson 292 Useful Horsepower Calculations
| PTO-to-engine power transfer | 89% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.7 ci per PTO hp |
| PTO horsepower per liter | 22.8 PTO hp per L |
| Engine size per engine horsepower | 2.4 ci per engine hp |
| Engine horsepower per liter | 25.6 engine hp per L |
| Torque per PTO horsepower | 3.2 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 23.5 rpm per PTO hp |
Massey Ferguson 292 Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 250 ci | 4.1 L |
| Bore and stroke | 3.98×5.00 inches | 101 x 127 mm |
| Compression | 17.5:1 |
| Rated RPM | 2200 |
| Torque | 297 lb-ft | 402.7 Nm |
| Torque RPM | 1400 |
Massey Ferguson 292 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Massey Ferguson 292 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 292 Horsepower FAQ
How much horsepower does the Massey Ferguson 292 have?
The listed engine output is 105 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 105 hp.
How much PTO horsepower does the Massey Ferguson 292 have?
The listed PTO output is 93.5 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 93.5 hp.
How much engine power reaches the PTO on the Massey Ferguson 292?
The PTO-to-engine transfer works out to 89%, from 105 engine hp to 93.5 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 292 engine?
The engine displacement is 250 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 292 engine stressed for its PTO horsepower?
The engine has about 2.7 cubic inches per PTO hp, using 250 ci and 93.5 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Massey Ferguson 292 make?
The output density is about 22.8 PTO hp per liter, using 93.5 PTO hp and 4.1 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 292 have?
The listed torque is 297 lb-ft, above the 240 lb-ft benchmark average. The 297 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Massey Ferguson 292 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.2 lb-ft per PTO hp, using 297 lb-ft and 93.5 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 292 rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
