Case IH Steiger 420 Rowtrac Fuel, Cooling, Starting & Service Specs
Starter volts
24
Battery volts
12
Case IH Steiger 420 Rowtrac Horsepower Comparison Charts
Engine horsepower comparison
This model
420 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
355 hp
Average
175 hp
Low
100 hp
High
320 hp
Displacement comparison
This model
787 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,100 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
2.2 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Steiger 420 Rowtrac Horsepower FAQ
How much horsepower does the Case IH Steiger 420 Rowtrac have?
The listed engine output is 420 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 420 hp.
How much PTO horsepower does the Case IH Steiger 420 Rowtrac have?
The listed PTO output is 355 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 355 hp.
How much engine power reaches the PTO on the Case IH Steiger 420 Rowtrac?
The PTO-to-engine transfer works out to 84.5%, from 420 engine hp to 355 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH Steiger 420 Rowtrac engine?
The engine displacement is 787 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH Steiger 420 Rowtrac engine stressed for its PTO horsepower?
The engine has about 2.2 cubic inches per PTO hp, using 787 ci and 355 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Steiger 420 Rowtrac make?
The output density is about 27.5 PTO hp per liter, using 355 PTO hp and 12.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH Steiger 420 Rowtrac rated at?
The rated speed is 2,100 rpm, close to the 2,100 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
