Case IH STX530QT Quadtrac Horsepower & PTO HP

Quick answer:

The Case IH STX530QT Quadtrac tractor engine horsepower is 535 hp | 398.9 kW, PTO horsepower is 473 hp | 352.7 kW, and the drawbar horsepower is 406.28 hp | 303.0 kW.

Engine HP535 hp | 398.9 kW
PTO HP473 hp | 352.7 kW
Drawbar HP406.28 hp | 303.0 kW
PTO Transfer88.4%
Displacement912 ci | 14.9 L

Case IH STX530QT Quadtrac Horsepower Specs

Engine horsepower 535 hp | 398.9 kW
PTO horsepower claimed 473 hp | 352.7 kW
PTO horsepower tested 534.72 hp | 398.7 kW
Drawbar horsepower tested 406.28 hp | 303.0 kW

Case IH STX530QT Quadtrac Useful Horsepower Calculations

PTO-to-engine power transfer 88.4% of engine hp reaches the PTO
Drawbar-to-engine power transfer 75.9% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 85.9% drawbar hp vs PTO hp
Engine size per PTO horsepower 1.9 ci per PTO hp
PTO horsepower per liter 31.7 PTO hp per L
Engine size per engine horsepower 1.7 ci per engine hp
Engine horsepower per liter 35.9 engine hp per L
Rated speed per PTO horsepower 4.4 rpm per PTO hp

Case IH STX530QT Quadtrac Engine Specs

Engine type turbocharged diesel
Displacement 912 ci | 14.9 L
Bore and stroke 5.394×6.654 inches | 137 x 169 mm
Compression 17:1
Rated RPM 2100

Case IH STX530QT Quadtrac Fuel, Cooling, Starting & Service Specs

Starter volts 24
Battery volts 12

Case IH STX530QT Quadtrac Horsepower Comparison Charts

Engine horsepower comparison

This model

535 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

473 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

406.3 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

912 ci

Average

520 ci

Low

360 ci

High

750 ci

Rated RPM comparison

This model

2,100 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

1.9 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH STX530QT Quadtrac Horsepower FAQ

How much horsepower does the Case IH STX530QT Quadtrac have?

The listed engine output is 535 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 535 hp.

How much PTO horsepower does the Case IH STX530QT Quadtrac have?

The listed PTO output is 473 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 473 hp.

How much drawbar horsepower does the Case IH STX530QT Quadtrac have?

The listed drawbar output is 406.3 hp, above the 150 hp benchmark average. That makes the 406.3 hp drawbar number more useful than engine hp for tillage and heavy pulling.

How much engine power reaches the PTO on the Case IH STX530QT Quadtrac?

The PTO-to-engine transfer works out to 88.4%, from 535 engine hp to 473 PTO hp. That is a normal usable range for judging PTO implement fit.

How efficient is the Case IH STX530QT Quadtrac for pulling work?

The drawbar-to-engine transfer is about 75.9%, from 535 engine hp to 406.3 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the Case IH STX530QT Quadtrac better judged by PTO hp or drawbar hp?

The drawbar output is about 85.9% of PTO output, comparing 406.3 drawbar hp with 473 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the Case IH STX530QT Quadtrac engine?

The engine displacement is 912 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.

Is the Case IH STX530QT Quadtrac engine stressed for its PTO horsepower?

The engine has about 1.9 cubic inches per PTO hp, using 912 ci and 473 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the Case IH STX530QT Quadtrac make?

The output density is about 31.7 PTO hp per liter, using 473 PTO hp and 14.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.