The Case IH CS 75 tractor engine horsepower is 75 hp | 55.9 kW, and PTO horsepower is 69.7 hp | 52.0 kW.
Engine HP75 hp | 55.9 kW
PTO HP69.7 hp | 52.0 kW
PTO Transfer92.9%
Torque205 lb-ft | 278.0 Nm | 214 lb-ft | 290.2 Nm
Displacement190.2 ci | 3.1 L | 201.2 ci | 3.3 L
Case IH CS 75 Horsepower Specs
Engine horsepower
75 hp | 55.9 kW
PTO horsepower claimed
69.7 hp | 52.0 kW
Case IH CS 75 Useful Horsepower Calculations
PTO-to-engine power transfer
92.9% of engine hp reaches the PTO
Engine size per PTO horsepower
2.7 ci per PTO hp
PTO horsepower per liter
22.5 PTO hp per L
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
24.2 engine hp per L
Torque per PTO horsepower
2.9 lb-ft per PTO hp
Rated speed per PTO horsepower
33 rpm per PTO hp
Case IH CS 75 Engine Specs
Engine type
turbocharged diesel
Turbocharged
diesel | 3-cylinder
Displacement
190.2 ci | 3.1 L | 201.2 ci | 3.3 L
Bore and stroke
4.13×4.72 inches | 105 x 120 mm | 4.25×4.72 inches | 108 x 120 mm
Rated RPM
2250 | 2300
Torque
205 lb-ft | 278.0 Nm | 214 lb-ft | 290.2 Nm
Torque RPM
1500 | 1400
Case IH CS 75 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Case IH CS 75 Horsepower Comparison Charts
Engine horsepower comparison
This model
75 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
69.7 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
190.2 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
205 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,300 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
2.7 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH CS 75 Horsepower FAQ
How much horsepower does the Case IH CS 75 have?
The listed engine output is 75 hp, close to the 80 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 75 hp as the main engine number.
How much PTO horsepower does the Case IH CS 75 have?
The listed PTO output is 69.7 hp, close to the 65 hp benchmark average. Use 69.7 PTO hp as the practical implement-sizing number.
How much engine power reaches the PTO on the Case IH CS 75?
The PTO-to-engine transfer works out to 92.9%, from 75 engine hp to 69.7 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.
How big is the Case IH CS 75 engine?
The engine displacement is 190.2 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH CS 75 engine stressed for its PTO horsepower?
The engine has about 2.7 cubic inches per PTO hp, using 190.2 ci and 69.7 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH CS 75 make?
The output density is about 22.5 PTO hp per liter, using 69.7 PTO hp and 3.1 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH CS 75 have?
The listed torque is 205 lb-ft, below the 240 lb-ft benchmark average. With 205 lb-ft listed, gearing matters more when the tractor is loaded hard.
Does the Case IH CS 75 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 2.9 lb-ft per PTO hp, using 205 lb-ft and 69.7 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH CS 75 rated at?
The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
