The New Holland 1920 dimensions found are: length is 126.4 inches | 321 cm, width is 58.5 inches | 148 cm, height is 90 inches | 228 cm, and wheelbase is 69.9 inches | 177 cm.
Length126.4 inches | 321 cm
Width58.5 inches | 148 cm
Height90 inches | 228 cm
Wheelbase69.9 inches | 177 cm
New Holland 1920 Dimensions
Overall length
126.4 inches | 321 cm
Overall width
58.5 inches | 148 cm
Overall height
ROPS: 90 inches | 228 cm
Wheelbase
69.9 inches | 177 cm
Ground clearance
Frame: 12.6 inches | 32 cm
Front tread
2WD: 43.1 to 57 inches | 109 to 144 cm | 4WD: 45.5 inches | 115 cm
Rear tread
45.7 to 61 inches | 116 to 154 cm
New Holland 1920 Weight
Shipping weight
2849 lbs | 1292 kg | 3069 lbs | 1392 kg
New Holland 1920 Tire Size Notes
Lawn/turf front
25×8.50-14
Lawn/turf rear
27×8.50-15
New Holland 1920 Dimension Comparison Charts
Length comparison
This model
126.4 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
58.5 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
90 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
69.9 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
12.6 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
2,849 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
51 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
New Holland 1920 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the New Holland 1920 is about 126.4 inches | 321 cm long, about 58.5 inches | 148 cm wide, and about 90 inches | 228 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
New Holland 1920 Dimensions FAQ
Is the New Holland 1920 a long tractor?
The New Holland 1920 is on the shorter side at 126.4 in, which is below the 145 in benchmark average. That makes its listed length easier to fit than many tractors in the same utility tractor range.
Is the New Holland 1920 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 58.5 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the New Holland 1920 tall for a shed or garage?
The listed height is low for the category at 90 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the New Holland 1920 need?
The bare footprint is about 51 sq ft from a 10.5 ft length and 4.9 ft width. That is below the 75 sq ft benchmark for this category.
Does the New Holland 1920 have a short or long wheelbase?
The wheelbase is short for the category at 69.9 in, which is below the 86 in benchmark average. That points to a more compact chassis length.
Does the New Holland 1920 have good ground clearance?
The listed ground clearance is low for the category at 12.6 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Is the New Holland 1920 heavy for its size?
The listed weight is light for the category at 2,849 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official newholland.com website before making shed, trailer, garage or transport decisions.
