The Massey Ferguson 4260 dimensions found are: length is 170.1 inches | 432 cm, minimum width is 81.1 inches | 205 cm, height is 106.3 inches | 270 cm, and wheelbase is 102.8 inches | 261 cm.
Length170.1 inches | 432 cm
Width81.1 inches | 205 cm
Height106.3 inches | 270 cm
Wheelbase102.8 inches | 261 cm
Massey Ferguson 4260 Dimensions
Overall length
170.1 inches | 432 cm
Overall width
Minimum width: 81.1 inches | 205 cm
Overall height
Cab: 106.3 inches | 270 cm
Wheelbase
102.8 inches | 261 cm
Ground clearance
Frame: 17.4 inches | 44 cm
Front tread
2WD: 57.1 to 85.4 inches | 145 to 216 cm | 4WD: 61.8 to 80.7 inches | 156 to 204 cm
Rear tread
60.2 to 88.2 inches | 152 to 224 cm
Massey Ferguson 4260 Weight
2WD Weight
8534 lbs | 3871 kg
4WD Weight
9050 lbs | 4105 kg
Massey Ferguson 4260 Dimension Comparison Charts
Length comparison
This model
170.1 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
81.1 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
106.3 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
102.8 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
17.4 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
8,534 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
96 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 4260 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Massey Ferguson 4260 is about 170.1 inches | 432 cm long, about 81.1 inches | 205 cm wide, and about 106.3 inches | 270 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Massey Ferguson 4260 Dimensions FAQ
Is the Massey Ferguson 4260 a long tractor?
The Massey Ferguson 4260 has an average listed length at 170.1 in, which is close to the 190 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Massey Ferguson 4260 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 81.1 in, which is below the 96 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Massey Ferguson 4260 tall for a shed or garage?
The listed height is low for the category at 106.3 in, which is below the 125 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 4260 need?
The bare footprint is about 96 sq ft from a 14.2 ft length and 6.8 ft width. That is below the 130 sq ft benchmark for this category.
Does the Massey Ferguson 4260 have a short or long wheelbase?
The wheelbase is average for the category at 102.8 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Massey Ferguson 4260 have good ground clearance?
The listed ground clearance is average at 17.4 in, which is close to the 18 in benchmark average. It is neither especially low nor especially high for this category.
Is the Massey Ferguson 4260 heavy for its size?
The listed weight is light for the category at 8,534 lbs, which is below the 13,000 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.
