The Massey Ferguson 285 dimensions found are: length is 142 inches | 360 cm, width is 79 inches | 200 cm, height is 65 inches | 165 cm, and wheelbase is 88.75 inches | 225 cm.
Length142 inches | 360 cm
Width79 inches | 200 cm
Height65 inches | 165 cm
Wheelbase88.75 inches | 225 cm
Massey Ferguson 285 Dimensions
Overall length
142 inches | 360 cm
Overall width
79 inches | 200 cm
Overall height
Hood: 65 inches | 165 cm
Wheelbase
88.75 inches | 225 cm
Ground clearance
Frame: 16 inches | 40 cm
Front tread
56 to 80 inches | 142 to 203 cm
Rear tread
60 to 96 inches | 152 to 243 cm
Massey Ferguson 285 Weight
Operating weight
7650 lbs | 3470 kg
Ballasted weight
With 1079 pounds of fluid in each rear tire, 776 pounds of iron on each rear wheel, and 220 pounds of iron in each front tire: 11760 lbs | 5334 kg
Massey Ferguson 285 Tire Size Notes
Ag front
7.50-16
Ag rear
16.9-38
Massey Ferguson 285 Dimension Comparison Charts
Length comparison
This model
142 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
79 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
65 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
88.8 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
16 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
7,650 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
78 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 285 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Massey Ferguson 285 is about 142 inches | 360 cm long, about 79 inches | 200 cm wide, and about 65 inches | 165 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Massey Ferguson 285 Dimensions FAQ
Is the Massey Ferguson 285 a long tractor?
The Massey Ferguson 285 has an average listed length at 142 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Massey Ferguson 285 narrow enough for tight storage?
The listed width is middle-of-the-pack at 79 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Massey Ferguson 285 tall for a shed or garage?
The listed height is low for the category at 65 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 285 need?
The bare footprint is about 78 sq ft from a 11.8 ft length and 6.6 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Massey Ferguson 285 have a short or long wheelbase?
The wheelbase is average for the category at 88.8 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Massey Ferguson 285 have good ground clearance?
The listed ground clearance is average at 16 in, which is close to the 15 in benchmark average. It is neither especially low nor especially high for this category.
Is the Massey Ferguson 285 heavy for its size?
The listed weight is heavy for the category at 7,650 lbs, which is above the 5,500 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.
