The Case IH PJ65 dimensions found are: length is 150.1 inches | 381 cm, width is 69.8 inches | 177 cm, height is 84.2 inches | 213 cm, and wheelbase is 83.1 inches | 211 cm.
Length150.1 inches | 381 cm
Width69.8 inches | 177 cm
Height84.2 inches | 213 cm
Wheelbase83.1 inches | 211 cm
Case IH PJ65 Dimensions
Overall length
2WD: 150.1 inches | 381 cm | 4WD: 149.9 inches | 380 cm
Overall width
Minimum: 69.8 inches | 177 cm
Overall height
ROPS: 84.2 inches | 213 cm
Wheelbase
2WD: 83.1 inches | 211 cm | 4WD: 87.6 inches | 222 cm
Ground clearance
Frame: 11.1 inches | 28 cm
Case IH PJ65 Weight
Weight
5677 lbs | 2575 kg
Case IH PJ65 Tire Size Notes
Ag rear
380/70R28
Case IH PJ65 Dimension Comparison Charts
Length comparison
This model
150.1 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
69.8 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
84.2 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
83.1 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
11.1 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
5,677 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
73 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH PJ65 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH PJ65 is about 150.1 inches | 381 cm long, about 69.8 inches | 177 cm wide, and about 84.2 inches | 213 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH PJ65 Dimensions FAQ
Is the Case IH PJ65 a long tractor?
The Case IH PJ65 has an average listed length at 150.1 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH PJ65 narrow enough for tight storage?
The listed width is middle-of-the-pack at 69.8 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH PJ65 tall for a shed or garage?
The listed height is low for the category at 84.2 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH PJ65 need?
The bare footprint is about 73 sq ft from a 12.5 ft length and 5.8 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Case IH PJ65 have a short or long wheelbase?
The wheelbase is average for the category at 83.1 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH PJ65 have good ground clearance?
The listed ground clearance is low for the category at 11.1 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Is the Case IH PJ65 heavy for its size?
The listed weight is average for the category at 5,677 lbs, which is close to the 5,500 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
