The Case IH Farmall 95N dimensions found are: length is 158 inches | 401 cm, width is 53.4 inches (min) | 135 cm, and wheelbase is 85.6 inches | 217 cm.
Length158 inches | 401 cm
Width53.4 inches (min) | 135 cm
Wheelbase85.6 inches | 217 cm
Case IH Farmall 95N Dimensions
Overall length
158 inches | 401 cm
Overall width
53.4 inches (min) | 135 cm
Wheelbase
85.6 inches | 217 cm
Ground clearance
Frame: 10.5 inches | 26 cm
Case IH Farmall 95N Weight
Weight
5820 lbs (ROPS) | 2639 kg
Case IH Farmall 95N Tire Size Notes
Ag front
7.50R18
Ag rear
14.9R28
Case IH Farmall 95N Dimension Comparison Charts
Length comparison
This model
158 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
53.4 in
Average
74 in
Low
60 in
High
90 in
Wheelbase comparison
This model
85.6 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
10.5 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
5,820 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
59 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 95N Extra Dimension Notes
ROPS
91.6 inches | 232 cm
Cab
90.7 inches | 230 cm
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 95N is about 158 inches | 401 cm long and about 53.4 inches (min) | 135 cm wide. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 95N Dimensions FAQ
Is the Case IH Farmall 95N a long tractor?
The Case IH Farmall 95N has an average listed length at 158 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 95N narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 53.4 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
How much floor space does the Case IH Farmall 95N need?
The bare footprint is about 59 sq ft from a 13.2 ft length and 4.5 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH Farmall 95N have a short or long wheelbase?
The wheelbase is average for the category at 85.6 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH Farmall 95N have good ground clearance?
The listed ground clearance is low for the category at 10.5 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Is the Case IH Farmall 95N heavy for its size?
The listed weight is average for the category at 5,820 lbs, which is close to the 5,500 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
