Case IH Steiger 500 Rowtrac Battery Size + Replacement Guide

Quick answer:

The Case IH Steiger 500 Rowtrac tractor battery spec found is 12 V with 900 CCA.

Voltage12 V
Cold cranking amps900 CCA

Case IH Steiger 500 Rowtrac Battery Size Details

Replacement battery recommendation The best replacement battery for the Case IH Steiger 500 Rowtrac tractor is a PLOMO/ACIDO battery of 143 Ah, specifically the VARTA K11 model. – 12 V, 900 CCA
Battery voltage 12 V
Battery CCA 900 CCA

Battery CCA Comparison Chart

Battery CCA comparison

This model

900 CCA

Average

850 CCA

Low

650 CCA

High

1,100 CCA

Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.

Case IH Steiger 500 Rowtrac Extra Battery Notes

Replacement note For the Case IH Steiger 500 Rowtrac, match the replacement battery to the captured spec: 12 V, 900 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location The battery on the Case IH Steiger 500 Rowtrac tractor is located under the cab. It typically features two batteries with a 12-volt system
Battery replacement steps To replace the battery on a Case IH Steiger 500 Rowtrac tractor, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal
Safe removal note Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note

Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.