Quick answer:
The Case IH Steiger 335 tractor battery spec found is 12 V, Group 31, with 1,000 CCA.
Voltage12 V
Group size31
Cold cranking amps1,000 CCA
Case IH Steiger 335 Battery Size Details
| Replacement battery recommendation | 12 V, Group 31, 1,000 CCA |
|---|---|
| Battery voltage | 12 V |
| Battery group size | 31 |
| Battery CCA | 1,000 CCA |
Case IH Steiger 335 Extra Battery Notes
| Replacement note | For the Case IH Steiger 335, match the replacement battery to the captured spec: 12 V, Group 31, 1,000 CCA. Physical fit, terminal layout and hold-down fit still matter |
|---|---|
| Battery location | The batteries on the Case IH Steiger 335 are located behind the right-side steps, on the left side of the tractor |
| Battery replacement steps | To replace the battery on a Case IH Steiger 335 tractor, first disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal |
| Safe removal note | Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame |
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.



