The Case IH Farmall 120CL tractor battery spec found is 12 V with 800 CCA.
Voltage12 V
Cold cranking amps800 CCA
Case IH Farmall 120CL Battery Size Details
Replacement battery recommendation
12 V, 800 CCA
Battery voltage
12 V
Battery CCA
800 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
800 CCA
Average
850 CCA
Low
650 CCA
High
1,100 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.
Case IH Farmall 120CL Extra Battery Notes
Replacement note
For the Case IH Farmall 120CL, match the replacement battery to the captured spec: 12 V, 800 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The battery on the Case IH Farmall 120CL tractor is typically located under the seat. This design is part of the tractor’s layout for efficient space utilization
Bad battery symptoms
Common symptoms of a failing battery in a Case IH Farmall 120CL tractor include hard starting or no response when trying to start, and corrosion on the battery terminals or connections. If the battery is only holding 11.5V or less, it likely needs to be replaced
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.
