Quick answer:
The Case IH Farmall 115C tractor battery spec found is 12 V with Group 31 battery sizing.
Voltage12 V
Group size31
Case IH Farmall 115C Battery Size Details
| Replacement battery recommendation | 12 V, Group 31 |
|---|---|
| Battery voltage | 12 V |
| Battery group size | 31 |
Case IH Farmall 115C Extra Battery Notes
| Replacement note | For the Case IH Farmall 115C, match the replacement battery to the captured spec: 12 V, Group 31. Physical fit, terminal layout and hold-down fit still matter |
|---|---|
| Battery location | The battery on the Case IH Farmall 115C tractor is located in the cab, with a CCA (Cold Cranking Amps) rating of 800. This setup is typical for tractors equipped with a cab for added comfort and protection |
| Battery replacement steps | To replace the battery on a Case IH Farmall 115C tractor, first disconnect the negative (black) terminal, then the positive (red) terminal. After removing the old battery, install the new one by connecting the positive terminal first, followed by the negative terminal |
| Bad battery symptoms | The most common Case IH Farmall 115C tractor battery-related symptoms include slow or no cranking, dim or flickering lights, and repeated need to jump-start the tractor. These issues often stem from sulfation, low electrolyte levels, or worn-out battery cells |
| Safe removal note | Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame |
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.







