The Kubota Z725 mower blade part number found is K5677-34340. The blade set part number found is K5583-34340. The deck uses 3 blades. The captured deck size is 60 in deck.
Kubota Z725 Mower Blade Size and Part Numbers
| Mower blade part number | K5677-34340 |
|---|---|
| Mower blade set part number | K5583-34340 |
| Number of blades | 3 blades |
| Deck size | 60 in deck |
| Blade type | high-lift, mulching, standard, Gator, and 3-in-1 |
Blade Size Comparison Chart
Mower deck size comparison
Kubota Z725 Blade Notes
| Blade note | The Kubota Z725 blade listing captured here shows single blade part number K5677-34340 and blade set part number K5583-34340. Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the Kubota Z725, the captured deck information is deck size 60 in deck and blade count 3 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the Kubota Z725, blade type is listed as high-lift, mulching, standard, Gator, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | The blunt rule with the Kubota Z725: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
Kubota Z725 Mower Blade FAQ
Should you buy one Kubota Z725 blade or a full set?
The single blade number captured is K5677-34340, and the set number captured is K5583-34340. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Why does the Kubota Z725 deck size matter before buying blades?
The captured deck setup is 60 in deck with 3 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Which blade type should you use on the Kubota Z725?
The blade type captured is high-lift, mulching, standard, Gator, and 3-in-1. Use that against the captured fitment value 60 in deck. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured Kubota Z725 blade part number enough to buy from?
The captured blade part number is K5677-34340. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
