The Cub Cadet LGTX 1050 mower blade part number found is 942-04053. The blade set part number found is 942-05052. The captured deck size is 50 in deck.
Blade part #942-04053
Blade set part #942-05052
Deck size50 in deck
Cub Cadet LGTX 1050 Mower Blade Size and Part Numbers
Mower blade part number
942-04053
Mower blade set part number
942-05052
Deck size
50 in deck
Blade type
mulching, bagging, and 3-in-1
Blade Size Comparison Chart
Mower deck size comparison
This model
50 in
Average
48 in
Low
38 in
High
60 in
Cub Cadet LGTX 1050 Blade Notes
Blade note
The Cub Cadet LGTX 1050 blade listing captured here shows single blade part number 942-04053 and blade set part number 942-05052. Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the Cub Cadet LGTX 1050, the captured deck information is deck size 50 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the Cub Cadet LGTX 1050 is mulching, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
For the Cub Cadet LGTX 1050, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
Cub Cadet LGTX 1050 Mower Blade FAQ
Should you buy one Cub Cadet LGTX 1050 blade or a full set?
The single blade number captured is 942-04053, and the set number captured is 942-05052. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
What is the fastest way to confirm the Cub Cadet LGTX 1050 blade?
Start with the captured 50 in deck deck and the blade value 942-05052. Then check the blade stamp or official parts diagram before ordering
Which blade type should you use on the Cub Cadet LGTX 1050?
The blade type captured is mulching, bagging, and 3-in-1. Use that against the captured fitment value 50 in deck. High-lift helps bagging/discharge; mulching blades need the right mulching setup
What should you double-check with the Cub Cadet LGTX 1050 blade part number?
The captured blade part number is 942-04053. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
