The deck belt size found is 85 in (2,159 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 79.5 in (2,019 mm) long by 0.5 in (13 mm) wide.
Deck belt sizelength 85 in (2,159 mm) and width 0.5 in (13 mm)
Drive belt sizelength 79.5 in (2,019 mm) and width 0.5 in (13 mm)
Deck size60 in deck
Cub Cadet Tank S6032 Belt Size and Part Numbers
Mower deck belt length
85 in (2,159 mm)
Mower deck belt width
0.5 in (13 mm)
Drive belt length
79.5 in (2,019 mm)
Drive belt width
0.5 in (13 mm)
Deck size
60 in deck
Belt Size Comparison Chart
Belt length comparison
This model
85 in
Average
75 in
Low
50 in
High
105 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Mower deck size comparison
This model
60 in
Average
60 in
Low
48 in
High
72 in
Cub Cadet Tank S6032 Belt Notes
Mower deck belt note
The Cub Cadet Tank S6032 deck belt measurement captured here is length 85 in (2,159 mm) and width 0.5 in (13 mm). Match the old belt, deck size and routing before spending money
Drive belt note
The Cub Cadet Tank S6032 drive or transmission belt measurement captured here is length 79.5 in (2,019 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Deck size note
For the Cub Cadet Tank S6032, deck size is listed as 60 in deck. Always match belt specs to the deck fitted to your machine, not just the tractor model name
Fitment note
For the Cub Cadet Tank S6032, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money
Cub Cadet Tank S6032 Belt Size FAQ
What should you watch when fitting a 85 in (2,159 mm) deck belt on the Cub Cadet Tank S6032?
A 85 in (2,159 mm) deck belt leaves little room for sloppy routing. This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Before blaming the new belt, compare the belt path to the routing decal and make sure it sits on the correct side of each keeper
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet Tank S6032?
The captured deck belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Which Cub Cadet Tank S6032 belt needs more careful length matching?
The deck belt is longer here: deck 85 in (2,159 mm) versus drive 79.5 in (2,019 mm), about 5.5 in (140 mm) different. Do not cross-match them just because both are mower belts
Why does the Cub Cadet Tank S6032 deck size matter before buying a belt?
The deck size captured is 60 in deck. That matters because the same tractor model can use different belt routing on different decks. Match the 60 in deck deck before relying on 85 in (2,159 mm)
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
